|
|
FirstClass
Wind Transmitter
The
FirstClass Wind Transmitter is designed to evaluate
the location and capacity of future wind power systems.
The FirstClass Wind Transmitter measures the horizontal
component of wind speed. The measured value is available
as a digital signal at the output. |
|
Low
Cost Stainless Steel Pressure Transducer
The
PX61 Stainless Steel Pressure Transmitter features compact
construction, an integral amplifier, 2-wire 4-20mA output
signal and extensive medium compatablility.
|
|
|
Ultrasonic
Anemometer
The Ultrasonic Anemometer 2D detects the horizontal
components of wind speed and direction in two dimensions
as well as the virtual temperature.
|
|
|
Drying,
Cooking and Curing Controllers
The EIL3000 Drying and Curing Batch Control System
controls the temperature and humidity during a batch
drying, curing or cooking process. The well thought
out display makes it easy for the operator to know the
operating conditions at all times.
|
|
|
SMD
Platinum-chip RTD Temperature Sensor
100 ohm, and
1000 ohm DIN standard RTD elements are now available
in surface mount design for under $1.50. These size
1206 and 805 SMD Surface Mount RTD Temperature Sensor
chips have accuracies of 1/3
degree from -50 to +130°C.
|
|
|
Paperless
Recorder
No ink cartridges
or paper are required with our new PR20 Paperless Chart
Recorder. The bright LCD can represent a conventional
paper chart or display graphical or digital trace representations.
|
|
|
Wet/Dry
Bulb to rH Transducer
The HT-WD-420
provides inexpensive yet very accurate Relative Humidity
Measurement over a wide temperature range. It connects
to two RTD sensors in a wet/dry bulb arrangement and outputs
4-20mA proportional to 0-100% rH.
|
|
|
Wind
Speed Direction Transmitters
Our
Compact Wind Speed Transmitters have the
perfect price performance ratio for most commercial and
industrial applications.
|
|
|
Simple
Temperature Controller
The ETTR is a Programmable
Temperature Relay with the ability to act as an ON/OFF
temperature controller. The device is capable of fully
stand alone operation, but may be monitored and programmed
with the custom software and a serial RS232 interface.
|
