Air Mag™ Star Profile Air Nozzle

The Nex Flow™ Air Mag™ Star Profile “patent pending” star profile air amplifying nozzle has the best force/air consumption ratio known. Ideal when higher force required in blowoff applications.

Air Mag™ Star Profile Air Nozzle Model 47004AMF

The first product of the Nex Flow™ Air Mag™ Star Profile “patent pending” star profile air amplifying nozzle and has the best force/air consumption ratio known. Ideal when higher force required in blowoff applications.

Sound Level 74 dBA at 3 ft. (0,91m) at 80 psig (5.5 bar)

How They Work

Air Mag™ Nozzle Model 47004AMF – Compressed air enters at point (A). Surrounding air (B) is entrained over the specially designed surface profile as the small amount of compressed air exits the specially designed holes drilled in the nozzle and combines at (C) to form a concentrated high velocity, laminar flow stream of amplified air flow and concentrated force with very high ratio of force/cfm.

Force Efficiency Of Nex Flow™ Air Mag™ Star Profile Air Nozzle Model 47004AMF To Competitive Versions

Note: Data for Force measured at 6” . Data measurement was done at a college test laboratory utilizing accurate force and flow measurement equipment. All nozzles tested under the same conditions. Published data was not used – only actual measurements made in the lab.

Performance Of Nex Flow™ Air Mag™ Star Profile Air Nozzle Model 47004AMF

How To Prove For Yourself How Good An Air Nozzle Is

The Nex Flow™ Air Mag™ Air Nozzle is designed so that the force at a particular pressure will be the same as a competitive nozzle of star profile design. To compare and prove the superiority of the Nex Flow™ Air Mag™ Air Nozzle it is easy. Simply replace the other nozzle and see what happens. To do this, have a pressure regulator and gauge upstream and if possible a flow meter upstream. Either have a scale to blow against or just apply it your particular application. For each nozzle, adjust the pressure upstream to that it is the same for all nozzles tested.

This is what you can expect…..

If you replace any competitive nozzle, you will probably have to cut back the pressure as you will get more force from the Nex Flow™ Air Mag™ Air Nozzle. This is because the air consumption is “less” at any given pressure which also means less pressure drop in the line as the air flows out through the nozzle. So you will actually be getting a bit more pressure and force as a result. You can then cut back the pressure if not needed thereby reducing compressed air use even more.

If you have a flow meter, all nozzles can be tested comparatively.

Alternatively, you can just try the various nozzles and you will find the Nex Flow™ Air Mag™ Air Nozzle to perform better simply because there is less pressure drop since it uses less compressed air, indicating its greater efficiency.

Applications Of Nex Flow™ Air Mag™ Star Profile Air Nozzle Model 47004AMF

• Part cleaning especially when higher force needed

• Heavy Chip removal

• Part drying

• Liquid blowoff

• Material conveying

• Part ejection

• Air assist

Air Nozzles Brochure - 1.25 MB

Air Mag Air Nozzles Brochure

Price List

Air Mag™ Star Profile Air Nozzle Model 47004AMF Product Drawings

Air Mag™ Air Nozzle.igs Air Mag™ Air Nozzle.pdf Air Mag™ Air Nozzle 3D.pdf Air Mag™ Air Nozzle.dwg