Air Knife Ionizer Static Control System
from Nex Flow™

Air Knife Ionizer Static Control System combines the superior designed Standard Air-Blade™ Air Knife with a quality static bar made by Haug North America. Static charges can be eliminated quickly, even over large distances and surface area.

The Air Knife Ionizer Static Control System uses a small amount of compressed air for a powerful, and adjustable force with “laminar” flow to eliminate static charges in applications where static bars cannot reach or where high speeds are a factor in static elimination.

Standard Haug static bars can address most applications. For extremely high speeds and charges extra powerful models are available. For washdown applications, even a washable model is available at extra cost.

Normally the Standard Model RN Haug static bar can address most applications. For extremely high speeds and high charges the extra powerful VS model is used. For washdown applications (such as pharmaceutical areas), even a washable model is available at extra cost.

All Haug static bars come with a patented safety connector and fully shielded cable. The power supplies are "repairable" and are so well made, that we offer a two year warranty on them (one year on the bars).

Air Knife Ionizer Static Control System For Dust Removal For Car Bodies:

Air Knife Ionizer Static Control System for dust removal for car bodies is an ideal application for the Ion Air Gun if manual cleaning is used and for the Air Knife Ionizer Static Control System prior to the vehicle entering a paint booth.

Air Knife Ionizer Static Control System Features:

• Connections on the back or ends

• It flows from end to end (full flow).

• Stainless steel models are available for high temperature and corrosive models.

• Models are designed for easy cleaning and prevention of dirt entering the static bar, minimizing potential damage.

• Patented connectors with the ground intrinsic to the cable design.

• Instant ON/OFF with no moving parts.

• Repairable Power Supply with a two year warranty.

Air Knife Ionizer Static Control System Benefits:

• Flexible mounting options.

• Units can be mounted end to end for longer lengths with no air gap.

• High temperature, extra strength, and even a unique washable stainless steel model is available for special applications or as required.

• Ease of cleaning and maintenance.

• No separate ground connection that can be cut and cause sparks or accidentally shock personnel.

• Conserves air use when not required.

• Eliminates one costly area which is power supply replacement. 2 year warranty assure quality product.

	Standard Air-Blade™ Air Ionizer
	Maintenance & Installation
	Price List

Air Knife Ionizer Static Control SystemApplications

Typical static eliminator applications replace expensive, high maintenance ionizing blower systems and are particularly advantageous in intermittent applications.

• Automotive
  Neutralize and blow off dust from auto bodies to plastic parts prior to painting.

• Bottling
  Clean bottles of dust prior to labeling. Keeps bottles neutralized which may attract dust prior to filling or packaging.

• Food
  Neutralize charges in all sorts of plastic packing materials and containers to prevent and/or minimize dirt contamination.

• General Manufacturing
  When dealing with any plastic parts or materials, static can cause jamming of machinery, dirt contamination, or be a personnel hazard.

• Paper
  Static charge and buildup in high speed paper production can cause quality problems and effect machine speed. If static bars cannot be mounted close, or if dirt is a problem due to static “dirt attraction”, our products can often address the problem.

• Plastic
  As with paper, the same problems can arise often more critical, even at lower speeds.

• Printing
  Whether it is a flat web or bottle printing, dirt on the surface can effect the final product. Our products can often dramatically improve the quality by removing dirt buildup due to static.

• Pharmaceutical
  Static buildup especially in packaging can attract unwanted dust both on the product and on the packaging. Our products can address many of these applications.

• Textile
  Static buildup in the textile industry can be often addressed when placement of the static bars cannot be close to the product.

1. Standard Air-Blade™ Ionizer with a standard Nex Flow™ Air-Blade™ Air Knife and standard strength Model RN Haug static bar. These units are ideal for most static removal applications.

2. X-Stream Air-Blade™ Ionizer with the extra quiet Nex Flow™ X-Stream Air-Blade™ Air Knife and standard strength Haug Model RN static bar. These units apply to most static removal applications where noise levels must be extremely low.

3. Super Triple Standard Air-Blade™ Ionizer with a standard Nex Flow™ Air-Blade™ Air Knife and a triple strength Model VS Haug static bar. These units are ideal for static removal applications where static charges are unusually high and extra ionization is required such as very high speed applications or materials that can produce very high charges such as Mylar or tissue.

4. Super Triple X-Stream Air-Blade™ Ionizer with extra quiet Nex Flow™ X-Stream Air-Blade™ Air Knife and a triple strength Model VS Haug static barr. These units are ideal for static removal applications where static charges are unusually high and extra ionization is required and where noise issues are important.

Special materials and static bars can be utilized for unique applications. If greater blow-off force is required, shims may be added to the Air-Blade™ Ionizer for higher capacities.

Effective Length	Model Numbers - (X means with X-Stream Air-Blade™, 150XX with RN static bar, 160xx means with VS static Bar)
3” 6” 12” 18” 24” 30” 36”	15003/15003X 15006/15006X/16006/16006X 1501215012X/16012/16012X 15018/15018X/16018/16018X 15024/15024X/16024/16024X 15030/15030X/15030/16030X 1503615036X/16036/16036X

Air Knife Ionizer Static Control System Power Supplies

Air-Blade™ Ionizer power supplies are available in various models including a unit that will monitor the static bars for effectiveness.

Voltage	Part Number	Description
110V 220V 110V 220V 110V 220V	80111 80112 80121 80122 80221 80222	Two outlet (Can connect two static bars) Two outlet (Can connect two static bars) Four outlet (Can connect four static bars) Four outlet (Can connect four static bars) Four outlet (Can connect four static bars, plus monitors performance. Can be connected into a system alarm or indicating light.) Four outlet (Can connect four static bars plus monitors performance. Can be connected into a system alarm or indicating light.)

Air Knife Ionizer Static Control System Dimensions

 

Model	"A"	"OA"
3" (76mm) 6" (150mm) 8" (203mm) 12" (305mm) 18" (457mm) 24" (610mm) 36" (914mm)	44mm 90mm 143mm 250mm 390mm 543mm 844mm	125mm 200mm 254mm 351mm 508mm 661mm 965mm