|
Dynamic Descaler® does not corrode, pit,
erode or have any other harmful effects on materials and metals
such as; STEEL, IRON, BRASS, COPPER, PLASTIC, FIBER, TEFLON
or other metals or materials found in water-based systems
or equipment. You can clean your equipment IN-SITU (and sometimes
without shutting down the machine).
Simple
and Effective
Dynamic Descaler® has the ability to dissolve
approximately 1.5kg of calcium carbonate scale per gallon
in concentrated form. It does not need to be heated up during
cleaning. Because Dynamic Descaler® is free rinsing you
do not need to neutralize or pacify the system. The uniqueness
of Dynamic Descaler® allows you to clean some equipment
while still in operation utilizing a minimum of your own personnel.
|
|
Petrochemical Plants
|
Why
Use Dynamic Descaler®?
It is a safe non-toxic, biodegradable chemical to be used
on the waterside of heat transfer equipment.
You do not have to heat Dynamic Descaler®.
Dynamic Descaler® is safer for the employees to use than
other acid products.
Your equipment will be cleaned in only hours without disassembling
any part of the equipment. Equipment can also be cleaned without
any down time (cleaning on the run).
Cleans down to the original surface without pitting.
Dynamic Descaler® is safe on copper, copper-nickel, bronze,
brass, iron, stainless steel and rubber.
Dynamic Descaler® will extend the usable life of your
equipment, especially when used as a part of a regularly scheduled
preventative maintenance program.
Removing the scale build up allows your equipment to operate
more efficiently with less down time.
Containers
Dynamic Descaler and D-Scale 518 are available
in the following containers:
Tankers
275 and 330 gallon totes
30 and 55 gallon drums
5 gallon pails
4 x 1 gallon cases
|
