Plastic Filters

All-purpose plastic filters from 3/4" to 3" in diameter. Filtration degrees available from 3500 to 22 micron.

•  High particle retention: Large filter area allows long intervals between cleaning.

• Non-corrosive and durable: Engineering plastics; No metal parts in contact with water.

•  Easy maintenance: The filters' elements can be extracted from the filter housing for rinsing.

• Interchangeable filter element types and a wide range of filtration degrees, to suit different requirements.

•  Minimal Energy Loss: Extremely low pressure loss at high flow rates.

•  Multi-Purpose: Suitable for irrigation, industrial, domestic and laboratory application.


Additional Options For Plastic Filters

Turboclean

A revolutionary solution for non-stop filtration: Particles are pushed to the the debris area, and the filter screen remains clean at all times. The Turboclean consists of an Amiad screen cylinder with a Torpedo inserted inside the screen cylinder, creating high velocity along the screen, thus preventing particles from remaining on it. Periodical opening of the drain port will release the dirt from the debris area without the need to open the filter for cleaning.


Autoflush

Automatic flushing of Turboclean filters: The Autoflush filters are supplied with a hydraulic valve that opens automatically by means of an electronic timer. The electronic timer allows determination of the flushing duration and the flushing intervals.

Brushaway

This unit is made of nylon brushes on a PVC frame which is threaded into the filter lid and the brush are then inserted inside the stainless steel screen. A simple handle outside the filter, allows brushing away particles from the screen surface, and expelling them out from the filter. Brushing is done during the filtering process without having to stop the water supply. For use with filtration degree of 200 micron and coarser.

Scanaway

The scanaway assembly consists of a PVC pipe with hollow wings that are facing the inner side of the screen. With a simple turn-of-a-handle, while the flushing port is open, the scanner rotates inside the screen and sucks in the dirt from the screen surface, expelling it out from the filter. Scanning is done during the filtering process without having to stop the water supply.