|
|
|
|
Pressure
Calibrators Hand Held |
Pressure
Calibrators Hand Held
 MicroCal
P palm-top
modular system introduces a new era in pressure calibration
standard. Compact, rugged, accurate, battery powered,
CE marked, MicroCal P
represent the ideal equipment for field and laboratory
test and calibration activities. Each instrument consists
of a basic electronic module combined with an easy
replaceable pressure module. The pressure range can
be selected according to your application requirements.
- Pressure
accuracy : ±0.05% of rdg. or ±0.1% of rdg.
- Optional
signal input for 0-30 Volt. and 0-22mA active
and passive loop
- Simultaneous
display of pressure and electrical signal values
- Pressure
range from 0 to 20 bar with replaceable pressure
sensor modules (available 9 different ranges)
- CalpMan
Software to document test and calibration activity
- Pressure
Trx test with direct reading of % error
- 10h
autonomy with rechargeable battery
- Optional
internal memory for data and procedures
- Standard
Pressostat & Leak test procedure
|
|
Signal
& Pressure Calibrators MicroCal PM200 |
|
MicroCal
PM200
High accuracy multifunction Signal & Pressure Calibrators
The
high accuracy Pressure Module is designed to operate
together with standard MicroCal
200/200+ calibrator extending the overall
performances to absolute, relative (gauge) and differential
pressure measurements and calibrations. Microcal
PM200 System represents the most advanced,
powerful and versatile portable indicator-simulator
available on the market today for measurements and
simulations of : millivolt, volt, milliampere
(active and passive loop), ohm, temperature with thermocouples,
temperature with resistance thermometers, frequency
and pulse and pressure.
In order to make the calibration activity easy the
PM200 System can be specified with an internal single
or twin pressure transducers up to 20 bar and, as
an option, with a built-in hand pressure pump, a volume
adjuster for fine control, a ventilation valve for
pressure release and a pressure port. As it is important
that the maximum pressure for the device under test
is not exceeded, a safety LIMITS function may be selected
to automatically block the pumping action at the desired
set pressure. Two overpressure valve are used to protect
the internal sensors (active also with instrument
switched off). An external pressure transducer can
be connected for pressure up to 700 bar. The case
made in aluminium, has the front panel extremely rugged
and designed to work with the internal pressure/vacuum
hand-pump.
- Pressure
accuracy : ±0.05% of rdg.
- Intelligent
Pressure Module for gauge, differential and
absolute pressure measurement and generation
combined with a high accuracy two-channel multifunction
MicroCal 200 calibrator.
- Simultaneous
display of pressure and electrical signal values
with 24 Vdc loop power supply (active and passive
loop).
- Pressure
range from –0.8 bar to 20 bar with internal
sensors and up to 700 bar with external sensor.
- Internal
pressure/vacuum generation with optional built-in
hand pump, volume adjuster and vent valve for
pressure Trx calibration.
- CalpMan
Software to document test and calibration activity.
- Data
logger with memory extension (PCMCIA card) for
more than 300000 data record.
- Graphic
LCD display with trend recording capability.
- Pressure
Trx test with direct reading of % error
|
|
