|
 Offering
the same reliability and performance as the T Series®, the
Super T Series provides additional advanced design features such
as external shimless adjustment, dual protection of bearings and
an "easy-grip" cover plate handle. The combination of
different sized pumps, impeller trims and speed variations ensure
that the correct capacity pump will be matched to the exact requirements
of your system, whether it's a small sub-division or a large waste
collection system. The Super T series pumps feature a large volute
design that allows them to reprime automatically in a completely
open system without the need for suction or discharge check valves
- and they can do it with the pump casing only partially filled
with liquid and a completely dry suction line.
Features
-
External Shimless Adjustment
The external shimless cover plate allows for easy adjustment
of the clearance between the impeller and the wearplate. This
process eliminates the need to realign belts, couplings or
other drive components. In turn, the working height of the
seal assembly and impeller back clearance are not disturbed.
The unique collar and adjusting screw allow for incremental
adjustments of the wearplate clearance with the turn of a
hand. Once adjustments have been made, the collar locks in
place maintaining the clearance setting even if the cover
plate is removed. This design doubles the life of the impeller
and wearplate, and keeps the pump operating at maximum efficiency.
-
Solids Handling
Two-vane, semi-open solids handling impeller handles up to
3" (75 mm) diameter solids, depending on pump model.
Pump out vanes on impeller shroud reduce foreign material
buildup behind impeller and reduce pressure on seal and bearings.
-
Exclusive Gorman-Rupp Cartridge Seal
Exclusive double-floating, self-aligning, oil lubricated mechanical
cartridge seal with stationary and rotating face of silicon
carbide or tungsten titanium carbide is specifically designed
for abrasive industrial service. Seal is available on 3",
4" and 6" (75 mm, 100 mm and 150 mm) pump models.
Optional seals are also available.
-
Removable Cover Plate with "Easy-Grip"
Handle
The removable cover plate with "easy-grip" handle
and pusher bolt capability provides quick and easy access
to the pump interior without disconnecting piping. Clogs can
be removed and the pump can be returned to service in minutes.
Impeller, seal, wearplate and flap valve can also be accessed
through coverlet opening for inspection or service.
-
Removable Rotating Assembly
Inspection of pump shaft or bearings is easily accomplished
without disturbing pump casing or piping by removing rotating
assembly. Simply remove four bolts from the back of the pump
and the assembly slides out.
-
Dual Protection of Bearings
Atmospheric isolation of seal cavity provides positive protect
of bearings. This unique design also provides capabilities
for external monitoring.
 View
Literature in PDF Format:
Super T Series Pumps
(2.6 mb)
|
