Sub-zero cold air temperatures from an ordinary compressed air supply for
spot air cooler applications where adjustability is important! |
Cold air is directed using the flexible tubing. A magnetic base is standard for portability and easy mounting of the adjustable spot cooler.
Units are available with either a single point hose kit for small surface area Adjustable Spot Cooler or a dual point hose kit when heat is generated over a larger surface area.
Adjustable spot cooler produces a wide range of airflow and temperature by adjusting the knob at the hot end and changing the various generators supplied.
The generators control the air consumption and are easily interchangeable.
Adjustable spot cooler has a 25 SCFM (708 SLPM) generator installed that will produce up to 1,800 Btu/hr. of cooling. If less is required, the 15 SCFM (425 SLPM) generator can deliver 1,100 Btu/hr.
If more cooling is needed Nex Flow™ Technologies can supply you with the 30 SCFM ( 850 SLPM) generator for up to 2,100 Btu/hr. of cooling.
|
Features
- No moving parts or electricity
- Compact and lightweight
- Low cost
- Maintenance free
- Instant cold air
- Quiet
- Magnetic base
- Interchangeable generators
|
Applications
-
-
-
Cool plastic machined parts
-
-
Cool welding horns on ultrasonics
-
-
Cool Electronic components
-
|
Adjustable Spot Cooler - Operation
Adjustable spot cooler - Frigi-X™ creates cold air from a vortex tube.
Using an adjustable knob at the muffled "hot end", waste hot air exits the tube and controls the temperature drop at the "cold end".
Air exits the cold end and is directed using adjustable flexible tubing to the point of use. The unit is portable using a magnetic base.
Adjustable Spot Cooler - Dimensions
