Static Control Products - Nex Flow Technologies

Static Control Products - Nex Flow™ Technologies feature Haug Static Control products.

Multicheck Model 80301
- tests if static bars and power supplies are working.

Quantitative performance testing The high-voltage test unit Multicheck Model 80301 is a performance testing unit for HAUG or other power packs and for HAUG ionization units. Unlike cheap AC Testers which only show if power is going into power supplies or static bars, the Multicheck actually indicates if a power supply or bar is working. As you get close to the static bar, or power supply, a red light goes on indicating power to the unit, then if there is adequate voltage to make the system work, the light goes green. A minimum voltage of 3600 volts is required to insure that a static elimination system is working. The Multicheck light will turn green if you have that voltage. AC Testers will NOT do this and are not an adequate indicator so be wary of marketing ploys which may offer AC testers at inflated prices.

For testing power packs, the red measuring probe is inserted into the high-voltage socket as far as it will go. After pressing the red push button the LED will illuminate green if the unit functions correctly. In case of malfunction, the LED will illuminate in red or no display at all is visible.

For testing ionizing units the test unit is moved vertically towards the ionizing tips. The LED will flash red; when the probe makes contact, the LED will illuminate in green if the ionizing unit functions correctly.

Hand Held Static Meter Model 80302
- used to indicate static charge on parts, sheets and webs.

The Hand Held "Static Control" Meter is reasonably priced and easy to handle. It is operated using an ON/OFF soft key (with circuit-breaker) and two further soft keys for the 0-100 and 0-1000 kV/m measuring ranges. The meter is battery powered. It should be part of any basic equipment of every electrical engineering workshop. It is rugged and durable for use in all types of plant operations.

Static Control Special Systems

Not all applications require compressed air, and optional blower systems can be supplied. Nex Flow™ Technologies has a wide variety of static control products to address many different applications. Contact the office or your nearest representative regarding your specific application which can be addressed with a variety of technical alternatives best suited to you. Examples of alternatives below:

Use of the X-Stream Air-Blade™ Air Knife may best apply where noise levels must be extremely low.

The Haug Model VS Static Bar has three times the output of a regular static bar. Combining this bar in lieu of the standard Model RN bar can dramatically improve the neutralization rate, and can address extremely highly charged applications. Used by itself or with an air device as required.

Where air is required to affect static removal at a distance and compressed air is not available, the Haug Ion Blower can be used with either the standard Model RN static bar or the extra powerful Model VS bar.

The Haug Ion Gun is ergonometrically designed, "repairable", and extremely powerful for applications where a flexible hand-held unit is required. Cable is lightweight, and fully shielded.

The Haug Mini Spot Ionizer neutralizes electrostatic spot changes with air support and greatest efficiency. This unit proves its efficiency especially in mounting places where there is little room or where mounting is very complicated. Applications include injection molding for the elimination of material particles or for cleaning of pendants.

The One-Point-Ionizer is excellent for the neutralization of the smallest parts. Emitting positive and negative ions, this unit neutralizes reliably electrostatic spot charges. This Ionizer is perfectly suited for mounting in places where there is little room. The One-Point-Ionizer can also be adapted to an air amplifier to produce a cone of neutralized air, ideal for neutralizing hard to get areas.

Explosion Proof Applications:
Many areas require explosion proof static bars and power supplies, all available from Nex Flow™ Technologies. Conforming to the international Apex rules, where applicable, these bars may be adapted to various air devices if required.

Charging Generators:
Sometimes a static charge is required to be produced for pinning applications. This technology is also available through Nex Flow™ Technologies.

SPECIAL NOTES:
Haug static bars all come with a patented connector to assure safety in operation and maintenance. Field repairable, it prevents a connection if the static bar is removed or attached while power is still on at the power supply.

Cable is FULLY SHIELDED unlike some manufacturers which claim shielding which may only be partial. This results in much longer life for Haug products.

REPAIRABLE POWER SUPPLIES - almost unheard of in the industry, Haug power supplies are repairable and come with a 2 year warranty.

Back to Air-Blade™ Ionizer main page.