|
|
 |
|
OEM
Grade Melt Pressure Transducers
from ONEhalf20
|
OEM Grade Melt Pressure Transducers
are designed exclusively for machine builders. This series
of transducers features better than 1% accuracy.
OEM Grade Melt Pressure Transducers from ONEhalf20
incorporate a liquid filled capillary design. This tried and proven
design provides an electronic signal which is proportional to
the measured pressure, and allows the transducer to operate at
process temperatures up to 750ºF or 400ºC. The electronics
of each transducer are a Wheatstone Bridge -Bonded Strain Gage
design, insuring high accuracy, reliablilty, and repeatability.
Dare
to Compare: Melt
Pressure Competitor Cross Reference Information
ONEhalf20
OEM Grade Melt Pressure Transducers are available in two distinct
styles:
| The CT Style Melt Pressure
Transducer, is the classic Melt Pressure Transducer
design. The CT Style Melt Pressure Transducer from ONEhalf20
comprises a 6" rigid stem, along with 18" of flexible
capillary, for optimal thermal isolation. |
 |
| |
CT Style Melt Pressure
Transducer |
 |
|
| The RT Style Melt Pressure
Transducer, which has only a 6" rigid stem, is
a rigid stem only version of the classic style Melt Pressure
Transducer. |
 |
| |
RT Style Melt Pressure
Transducer |
All OEM Grade Melt Pressure Transducers
from ONEhalf20 are
fully compatible with the industry standard wiring pattern and
color coding, as well as offering 100% mechanical compatibility
with existing Melt Pressure Transducers utilizing the 6 Pin
Bayonet connector. There is seldom a need to re-wire when installing
ONEhalf20 Melt Pressure
Transducers.
With 100% form, fit, and functionality,
at the most competitive prices, OEM Grade Melt Pressure Transducers
from ONEhalf20 are
rapidly becoming the preferred choice of cost conscious Plastics
Processors throughout the globe.
OEM Grade Melt Pressure Transducers from ONEhalf20
offer high accuracy, repeatability, industry standard functionality,
at prices substantially below the competitors.
Features:
-
All ONEhalf20
OEM Grade Melt Pressure Transducers come complete with a 25"
interconnecting cable assembly all other manufacturers charge
as much as $100.00 extra for this item
-
Global Leader
in price/performance, quality, and delivery
-
6 Pin Bayonet
Connector – Industry Standard Design – Compatible
Color Coding
-
80% Output Calibration
– Industry Standard
-
Fully interchangeable
with competitors models without re-wiring – 100% Field
Compatibility
-
OEM Grade Melt
Pressure Transducers featuring 1% accuracy
General
Specifications:
Mechanical
Specifications:
-
Pressure
Ranges:
0-3,000 psi to 0-10,000 psi, Metric ranges are available
-
Mounting:
½- 20 UNF thread
-
Mounting
Torque:
500 inch pounds maximum, (150 inch pounds recommended)
-
Diaphragm
Material: 15-5PH Stainless Steel
-
Overload
Capacity: 2 times FSO (full scale output)
-
Temperature
Ratings: Diaphragm 750ºF, Electronics 225ºF
-
Accuracy:
Non-Linearity better than 1% FSO
-
Repeatability:
Better than .15% FSO
Electrical
Specifications:
-
Type:
Bonded Strain Gage, 4 Leg Wheatstone Bridge
-
Bridge
Resistance: 350 ohm +/- 5%
-
Output:
3.3mV/Volt, 4-20 mA or 0-10 Vdc are available
-
Excitation
Voltage: 10Vdc Recommended
-
Internal
Calibration:
80% of Full Scale Output
-
Insulation
Resistance:
1,000 Mohms @ 50Vdc
-
|
|
|
CT
Style With
Thermocouple Option
|
Temperature Output:
Type “J”
-
Mounting:
½ - 20 UNF,
M18 X 1.5 available
-
-
-
Interconnecting
Cable Assembly:
25’ Cable Assembly included with Transducer
| OEM
Grade Melt Pressure Transducers |
|
|
