 |
  Current Issue Volume 8 Issue 2 |
Process
Controls Online Magazine
See
Our New 300 Page Industrial Valve Selection Guide
See Our
New 100 Page Industrial Pump Selection Guide
 |
Tubing
for Peristaltic Pumps York Fluid Controls offers 8 different tubing materials for Watson-Marlow Bredel’s peristaltic pumps to handle a wide range of chemicals and application requirements. All tubing materials are designed to meet specific needs, such as tube life, purity, pressure/suction performance, and chemical compatibility. The available materials are peroxide-cured silicone, platinum-cured silicone, Bioprene®, Marprene®, tygon formulation R3603, Flourel™ and Butyl. Continuous tubing is available in 50 foot packs and also in 7 bore sizes.
|
||
 |
Oil
Spill and Separator Alarm This floating sensor tracks the changing surface level of water in sumps, separators and lagoons to alarm in the presence of surface oil. This will alert to oil spills or control pumps and valves to minimize the risk of pumping hazardous oil into the wastewater stream. Ideal for municipal and industrial applications, the unit may be supplied intrinsically safe.
|
||
 |
Trueline
Knife Gate Valves All Trueline Knife Gate Valves are built and tested in accordance with MSS-SP81 and TAPPI T1S 405-8 specifications. All metal seated valves meet or exceed seat test requirements. Test data is available on re-quest. This must have catalog features Trueline’s Uni-Directional, Bi-Directional, Custom made Knife Gate Valves. Engineering data, product descriptions, features, sizes, materials of construction are presented.
|
||
 |
EZ-View®
Flow Meters Featuring Hedland’s unique spring loaded variable area design. EZ-View meters can be installed in any position without affecting accuracy. They can be installed quickly without costly flow straighteners or other special plumbing requirements. These meters operate within ±7% accuracy and are constructed of Polysulfone plastic. Available in 1/2, 3/4, & 1” NPTF or 3/4 & 1” brass and PVC sweat fittings.
|
||
 |
Circulation
Heaters Compact and efficient, Circulation Heaters may be used in forced or natural circulation systems to heat flowing gasses or liquids. Pipe plug or Flanged immersion heater, vessel, insulation, terminal enclosure, mounting brackets and inlet and outlet connections are included. Installation is simple with only basic wiring and piping connections required. Applications include: Heat transfer oils - Molding dies and platens, closed loop heat transfer systems for heat sensitive materials Fuel Oil Heating - Preheating for delivery to burners, preheating to pumping viscosity. Water - Dishwashing an rinsing, hot water storage tanks, process water
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Pages | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | Previous Issue
