Horizontal,Peeler,Centrifuge,Western States

Horizontal Peeler Centrifuge
Process Controls Index
General
Kason Products
K-Tron Products
Littleford Day Products
Sturtevant Products
Western States
Abanaki Products
  Comi-Condor Horizontal Peeler Centrifuge from Western States

Horizontal,Peeler,Centrifuge,Western StatesComi-Condor has the most advanced Horizontal Peeler Centrifuge available today.

Applications

  • Pharmaceuticals and Fine Chemicals.

Design Features

  • Batch Capacities from 0.8 ft3 laboratory size to 32.5 ft3 production scale.
  • High Filtering Capability with 800 to 2,000 gravities of force.
  • Horizontal design assures even coating of the filter and avoids vibration problems due to loading.
  • Polypropylene PTFE cloth.
  • Gas tight to 400mm H2O (0.6 psig)
  • Automatic Front Housing (cover) Locking Ring.
  • All degrees of mechanical and electro-polish available.
  • Efficient cake removal and minimal residual cake (heel) with non-fouling blade, air knife and reverse blow-back from rear of filter.
  • Solids discharge chute is a steep 30° (37° on largest units) and assures no product hang up.
  • Integral Inertia Mass Pad and Hydro Viscous Dampers allow installation directly onto the floor.
  • Through-the-wall installation provides separation of clean room and mechanical service areas.
  • Shafts and bearings serviceable from rear (service area) side without contaminating the process side.
  • All process surfaces can be visually inspected.
  • Fully accessible gaskets and seals.
  • Cleaning-In-Place (CIP) Design.
  • Available in 316L stainless steel, Hastelloy, Monel, Alloy 59 and other exotic materials.
  • Coatings include Halar (ECTFE) , PTFE and Ebonite.

Site Design: Process Controls And Instrumentation