|
|
Mighty
Mini SST
- Smallest and lightest
Abanaki skimmer - weighs about six pounds
- Easily hand carried to
the source of the problem - can fit almost anywhere
- Oil removal rates up to
2.0 gph
- Designed for tank depths
from 6" to 24" (15.2 cm to 61.0 cm)
- Belt and tail pulley can
fit through a 2" (5.1 cm) diameter bung hole
- Great for automotive and
mobile equipment service shops
- Very affordable
- Ask about OEM options
- Stainless steel construction
- Integrated 24 hour timer
|
|
|
The
Portable Tote-It
- Lightweight for portability;
approximately 36 pounds
- Can be installed permanently
in limited access areas
- Oil removal rates up to
12 gph (45 lph)
- Standard length is 5'
center to center (10' maximum)
- For medium duty applications;
parts washers, tanks, etc.
|
|
|
Oil
Grabber Model 4
- A single unit elevates
and separates oil at a rate up to 20 gph
- Lifts oil up to 100' without
the need of expensive pumps
- Maintains skimming efficiency
with fluctuating fluid level
- Can be used in depths
as shallow as one foot
- Requires no tank modifications
in most applications
- Operates in turbulent
liquid using optional tail pulley cage and tether assembly
- Easy mounting and fast
cleaning, with minimal maintenance
|
|
|
Oil
Grabber Model 8
- Similar to the Model 4
with additional features
- A single unit elevates
and separates oil at a rate up to 40 gph
- Can be used with a full
range of Abanaki options (heater, debris rakes,
belt and tail pulley tethers, etc.)
- Saves coolant and conserves
wash water
- Flagship unit of Abanaki's
product line
|
|
|
Oil
Grabber Model MB
- Designed for jobs that
require high capacity oil removal
- Each belt increases the
removal rate by up to 40 gph
- 2 x 8 skims 80 gph
- 3 x 8 skims 120 gph
- 5 x 8 skims 200 gph
- Utilizes continuous belts
and wipers to remove oil from the fluid surface.
|
|
|
Oil
Boss
- Skims up to 16 gph
- Completely constructed
of Stainless Steel
- Drive unit is completely
covered
- Comes with a pilot light
and on/off selector
- Easily decontaminated
|
|
|
Grease
Grabber
- Abanaki's most rugged
unit
- Works for both greases
and oils
- Grease removal rates up
to 160 gph (606 lph)
- Designed for extremely
demanding environments
- Suitable for outdoor drainage
pits in primary metal mills
- Optional boom mast mount
with swing arm for large pits and tanks
- Integral 700W heater keeps
skimmed grease fluid for easy discharge
|
|
|
PetroXtractor
- Well Oil Skimmer
- Used primarily for groundwater
remediation through monitoring and remediation wells
- Comes in three varieties
- PX-A for 2" diameter
wells (3gph, SAE 30)
- PX-B for 4" diameter
wells (6gph, SAE 30)
- PX-C for 6" diameter
wells (12 gph, SAE 30)
- Works for LNAPL's and
some DNAPL's (coal tar, #6 fuel, etc.)
- Options include: explosion
proof setup, below grade mounting kits, timer, housing
55 gallon drum shutoff switch and air motors
|
|
|
Oil
Concentrator
- Removes residual water
in the skimmed oil
- Provides virtually complete
oil/water separation
- An optional unit available
on all Abanaki oil skimmers
- Uses no electricity, timers,
sensors, pumps, or other moving parts
- Several sizes to fit any
application
- Optional heater available
for high viscosity oils and low temperatures
- Removable sludge screen
and drain plug facilitate routine maintenance
- All hardware provided
for easy mounting to Abanaki skimmer
|
|
|
Q-VAC™
100
- Empties coolant from sump
- Vacuums oil, coolant,
and other floor spills
- Removes surface decontaminates
from process baths
- Empties tanks and drain
pits
- Vacuums containers and
vats absolutely dry
- Minimizes use of absorption
materials
- Fits on a standard 55
gallon, closed top drum
- Requires no filters
- Contains no parts to break
or replace
|
|
|
Coolant
Maintenance Products
- Mighty Disk™ Oil Skimmer
- Mighty Mini® SST Oil Skimmer
- TubeTastic!™ Oil Skimmer
- Coolescer™ Coolant Refresher
- Coolant™ Mints
- Abanaki Aerators
|
