Self Priming Centrifugal Pumps from Burks Pumps

W & WB Series Centrifugal Pumps - Self Priming Features:

Self Priming Centrifugal Pumps, Series, W, WB, Burks Pumps, Vissers Sales CorpFOUR POSITION CASING

Discharge can be located in any of four positions. Casing is close grain iron of 30,000 psi minimum tensile strength. Back pull-out design eliminates the need to disturb piping should the pump ever require service - the casing stays in the line.

ENCLOSED BRONZE IMPELLER

Of the latest hydraulic design for maximum efficiency, impeller is balanced for vibration-free operation and threaded onto stainless steel motor shaft.

ENCLOSED GLASS FILLED NORYL® IMPELLER*

Of the latest hydraulic design for maximum efficiency, impeller has molded in brass insert threaded onto stainless steel motor shaft. *Noryl® Impeller is not designed for use with hydrocarbons.

MECHANICAL SHAFT SEAL

Standard self-adjusting shaft seal for temperatures to 225°F (107°C) and pressures to 150 psi (1034 kpa). Ceramic seat and carbon seal face for long trouble-free service. Special seals are available for higher temperatures and fluids other than water.

MOTORS

Standard pump motors are of open drip proof (ODP) construction and are rated with jet pump service factors for continuous duty operation. Motors are 56 frame size with NEMA standard mounting flange, one piece threaded stainless steel shaft and ball/ball bearing construction.

FACTORY TESTED

After careful assembly and inspection, EVERY pump is factory tested and meets Hydraulic Institute standards.

Self Priming Centrifugal Pumps, Series, W, WB, Burks Pumps, Vissers Sales CorpWA6 Series Self Priming Centrifugal Pumps

  • Capacities to 100 GPM

  • Heads to 130 feet

  • Cast iron/Noryl® fitted, cast iron/bronze fitted, all iron, and all bronze constructions.

  • Buna-N, EPT, and Viton mechanical seals.

  • Enclosed high-efficiency impellers.

  • Standard NEMA electric motors with ODP, TEFC, or explosion proof enclosures

W Series

Self Priming Centrifugal Pumps, Series, W, WB, Burks Pumps, Vissers Sales CorpWB Series Self Priming Centrifugal Pumps

  • Capacities to 1875 GPM

  • Heads to 180 feet

  • Cast iron and 316 stainless steel constructions.

  • Buna-N and Viton grease lubricated mechanical seals.

  • Enclosed, five vane impellers.

  • Heavy bearing frame with oil lubricated ball bearings set on a wide spacing for solid shaft support.

W Series


Back to Top