Regenerative Turbine Pumps from Burks Pumps

CR, CT, ET, CS, ES, EC & ED Series Centrifugal Pumps - Self Priming Features:

Regenerative Turbine Pumps, CR, CT, ET, CS, ES, EC, ED, Series, Centrifugal Pumps, Vissers Sales CorpFEATURES

Cast Iron/ Bronze/ Stainless Steel construction Low Flow- High Pressure

FOUR POSITION CASING

Discharge can be located in any of four positions. Casing is close grain iron of 30,000 psi minimum tensile strength. Back pull-out design eliminates the need to disturb piping should the pump ever require service - the casing stays in the line.

ENCLOSED BRONZE IMPELLER

Of the latest hydraulic design for maximum efficiency, impeller is balanced for vibration-free operation and threaded onto stainless steel motor shaft.

ENCLOSED GLASS FILLED NORYL® IMPELLER*

Of the latest hydraulic design for maximum efficiency, impeller has molded in brass insert threaded onto stainless steel motor shaft. *Noryl® Impeller is not designed for use with hydrocarbons.

MECHANICAL SHAFT SEAL

Standard self-adjusting shaft seal for temperatures to 225°F (107°C) and pressures to 150 psi (1034 kpa). Ceramic seat and carbon seal face for long trouble-free service. Special seals are available for higher temperatures and fluids other than water.

MOTORS

Standard pump motors are of open drip proof (ODP) construction and are rated with jet pump service factors for continuous duty operation. Motors are 56 frame size with NEMA standard mounting flange, one piece threaded stainless steel shaft and ball/ball bearing construction.

FACTORY TESTED

After careful assembly and inspection, EVERY pump is factory tested and meets Hydraulic Institute standards.

Regenerative Turbine Pumps, CR, CT, ET, CS, ES, EC, ED, Series, Centrifugal Pumps, Vissers Sales CorpCR Series Turbine Pumps

  • Capacities to 4.3 GPM

  • Heads to 225 feet

  • All bronze construction with monel impeller blades.

  • Buna-N and Viton mechanical seals.

  • Field adjustable impeller for extended service life.

  • Capacitor start motor with built in automatic overload protection.

  • Jacketed seal cavities available for product temperatures to 500°F.

CR Series

Regenerative Turbine Pumps, CR, CT, ET, CS, ES, EC, ED, Series, Centrifugal Pumps, Vissers Sales CorpRegenerative Turbine Pumps, CR, CT, ET, CS, ES, EC, ED, Series, Centrifugal Pumps, Vissers Sales CorpCT and ET Series Turbine Pumps

  • Capacities to 8 GPM

  • Heads to 350 feet

  • Cast iron/bronze fitted, all bronze and stainless steel constructions.

  • Buna-N, EPT, and Viton mechanical seals.

  • Field adjustable impeller for extended service life.

  • CT series have standard NEMA electric motors with ODP, TEFC, or explosion proof enclosures.

  • ET series pumps have a heavy bearing frame with grease lubricated ball bearings set on a wide spacing for solid shaft support.

  • Jacketed seal cavities available for product temperatures to 500°F.

CT Series

ET Series

Regenerative Turbine Pumps, CR, CT, ET, CS, ES, EC, ED, Series, Centrifugal Pumps, Vissers Sales CorpRegenerative Turbine Pumps, CR, CT, ET, CS, ES, EC, ED, Series, Centrifugal Pumps, Vissers Sales CorpCS and ES Series Turbine Pumps

  • Capacities to 32 GPM

  • Heads to 350 feet

  • Cast iron/bronze fitted, all bronze and stainless steel constructions.

  • Buna-N, EPT, and Viton mechanical seals.

  • Field adjustable impeller for extended service life.

  • CS series have standard NEMA electric motors with ODP, TEFC, or explosion proof enclosures.

  • ES series pumps have a heavy bearing frame with grease lubricated ball bearings set on a wide spacing for solid shaft support.

  • Jacketed seal cavities available for product temperatures to 500°F.

CS Series

ES Series

Regenerative Turbine Pumps, CR, CT, ET, CS, ES, EC, ED, Series, Centrifugal Pumps, Vissers Sales CorpEC and ED Series Turbine Pumps

  • Capacities to 91 GPM

  • Heads to 350 feet

  • Cast iron/bronze fitted and all bronze constructions.

  • Buna-N, EPT, and Viton mechanical seals.

  • Field adjustable impeller for extended service life.

  • Heavy bearing frame with grease lubricated ball bearings set on a wide spacing for solid shaft support.

  • Jacketed seal cavities available for product temperatures to 500°F.

EC & ED Series


Back to Top