|
 The S310 pump is designed to fit into small spaces such as 4" well casings, transformer vaults and bilges. Typical jobs may include blast hole de-watering, ground water evacuation and sampling, utility manholes and marine vessel compartment pumping.
Quick Specs
Discharge Size: 1 1/4 Inch NPT F
Maximum Flow: 68 GPM (255 LPM)
Maximum Head: 140 Feet (41 M)
Hydraulic Input: 6 GPM Max. (23 LPM)
Hydraulic Pressure: 1800 PSI Max. (122 Bar)
Weight: 9 Lbs (4 Kg)
Key Features
• Slim Line Design fits Through 4" Openings
• Efficient Semi-Open Impeller
• Oil Lubricated Seals (can run dry)
• Variable Speed hydraulic drive
• Dependable gear type hydraulic motor
• Available in all Stainless Steel (S310SS)
• Safe Hydraulic Drive can be used where electric power is hazardous or impractical
• Operates with our HT6 to HT13 power units or other hydraulic power sources capable of flows to 6 GPM
Specifications
WEIGHT: 9 lbs. (4 kg)
HEIGHT: 13 1/2" (343 mm)
DIAMETER: 3 1/8" (79 mm)
DISCHARGE: 1 1/4" NPT(F)
HOSE PORTS: 1/4" NPT (F)
PUMP CASING: Stainless Steel
IMPELLER: Stainless Steel
SHAFT: Stainless Steel
MOTOR HOUSING: Aluminum
SUCTION/DISCHARGE HOUSINGS: Aluminum
SHAFT SEAL: Carbon/Ceramic (Std)
ELASTOMERS: Buna N (Std)
HYDRAULIC OIL: 214-320 s.s.u. @ 100°F (64°C)
INPUT FLOW: Max. 6 GPM (23 LPM)
OPERATING PRESSURE: Max: 1800 PSI (122 Bar)
POWER SOURCE: Any Open Center Hydraulic System
Spec Sheet
|
