 GIANT PUMPS manufactures an exciting line of high pressure, high temperature, and high flow pumps. Their quality construction and versatility are known throughout the world. Giant Pumps are in every major application where extreme operating conditions are required including pressure washing, car washing, reverse osmosis (RO), boiler feed, hydro static testing, agriculture, high pressure injection, and many others.
York Fluid Controls Ltd., carries a complete line of Giant pumps, Giant pump parts, pump/motor units, spray guns, nozzles, pump oil, pressure switches, pop-off relief valves, thermo & unloader valves, car wash towels, Giant Pump repair parts and kits. Below is a listing of some of the Giant products carried by York Fluid Controls Ltd.
GIANT PUMPS
|
|
CO2 Pumps
These pumps are designed to handle the various types of Bentonite mixtures, which are often found in drilling fluids often used in directional drilling, hydro-excavating and other processes in which the soil is prone to collapse without the Bentonite solution. These pumps range from 3 GPM (12 L/min) to 132 GPM (500 L/min).
<< Learn More >>
|
|
|
Brine Pumps
For applications in which the water has a high salt content and/or some hydrocarbons, the Giant series of Brine pumps have been designed with corrosion-resistant materials. Most of these pumps are run on a continuous basis, so reliability is a key factor in choosing the correct pump size.
<< Learn More >>
|
|
|
CO2 Pumps
Pumping liquid CO2 requires unique challenges to high pressure pumps. CO2 has a tendency to go to a gaseous state, so strict control of the temperature and pressure on the inlet and discharge of the system will help maintain the CO2 in a liquid state. Typical applications can be industrial laundry cleaning, CO2 re-fill stations and cleaning of parts with CO2. These pumps have a flow range up to 52 GPM (196 L/min).
<< Learn More >>
|
|
|
Corrosion Resistant Pumps
Pumps that can withstand the corrosive effect of certain types of fluid are classified as corrosive-resistant. A pumps ability to withstand corrosion is based on the type of materials used in the fluid end of the pump. Corrosion-resistant pumps will normally have valve casings made with Nickel-Aluminum-Bronze, AISI 316 stainless steel or Duplex stainless steel. Typical applications for these pumps are reverse osmosis (desalination), brine pumping, waste-water injection, chemical processing, humidification, misting, and degreasing/cleaning for industrial applications.
<< Learn More >>
|
|
|
GP Pumps
Giant GP Series Triplex Plunger Pumps are designed and manufactured in Germany, the GP Series premium industrial pumps are meant for continuous duty applications. With a power range up to 150 Hp (110 kW), these Triplex Plunger Pumps are used in a variety of heavy duty applications from steel processing, water hydraulics, fire suppression, sewer jetting, boiler feed, truck washes, waste water re-injection, jetting, deburring, liquid CO2 and other industrial applications.
<< Learn More >>
|
|
|
GX Pumps
Giant GX Series Triplex Plunger Pumps is a high-end consumer/light industrial pumps which provide a reliable source of cleaning power for the home owner and/or small shop. The Giant GX Series Triplex Plunger Pumps are compact and easy to maintain. Made in the U.S.A., they are sold throughout North America and are a good alternative to inexpensive home center products.
<< Learn More >>
|
|
|
High Temperature Pumps
Don't let dirty, wet and contaminated compressed air limit the performance of your AODD pumps. We recommend the use of a Filter/Regulator with every pump.
Improvements to the product line include a liquid filled pressure gauge as well as a full line of accessories such as Lockout Valves & Mounting Bracket Kits. These reliable point-of-use Air Filter/Regulators have been specifically developed for Air Operated Double Diaphragm (AODD) pumps to reduce maintenance and lower operating costs.
<< Learn More >>
|
|
|
Series P46/P47 Triplex Plunger Pumps
P46/P47 Pumps
Designed and manufactured in Germany, these small medium duty pumps are meant for continuous duty applications. With a power range up to 6 Hp (4.4 kW), these pumps are used in a variety of applications including car washing, hot water pressure wash, harsh-duty cleaning stations, boiler feed, carpet cleaning and other industrial applications. Flow ranges is up to 4 GPM (15 L/min) and pressure range is from 100 PSI (7 Bar) to 3000 PSI (200 Bar). Temperature range is up to 220 °Fahrenheit (105 °Celsius). Fluid end material is forged brass.
<< Learn More >>
|
|
|
Series P54/P58/P59 Triplex Plunger Pumps
P54/P58/P59 Pumps
Designed and manufactured in Germany, these uniquely shaped medium duty pumps are meant for continuous duty applications. With a power range up to 12.1 Hp (9 kW), these pumps are used in a variety of applications including prep station for a car wash, pressure washing, sewer cleaning and other industrial applications. Flow ranges is up to 9 GPM (33 L/min) and pressure range is from 100 PSI (7 Bar) to 4000 PSI (280 Bar).
<< Learn More >>
|
|
|
Series P55/P56 Triplex Plunger Pumps
P55/P56 Pumps
Giant P55W/P56W Series Triplex Plunger Pumps are designed and manufactured in Germany, these medium duty pumps are meant for continuous duty applications. With a power range up to 8 Hp (6 kW), these pumps are used in a variety of applications including car wash, pressure washing, boiler feed, carpet cleaning, sewer cleaning, desalination, and other industrial applications.
<< Learn More >>
|
|
|
Series P57 Triplex Plunger Pumps
P57 Pumps
This specialty pump is designed and manufactured in Germany and is suitable for hydrostatic testing and other applications which require small amounts of flow and high pressure. Chemical injection in a pharmaceutical plant would be an example.
<< Learn More >>
|
 |
P200 Series Pumps
Using the same tolerances as our German partners, Giant manufactures this American-made triplex plunger pump. Because of the many unique applications for this pump, we offer a variety of accessories to adapt to a multitude of applications. See our P200 selection guide for product offerings. These pumps are made for medium duty applications, but are often used for 10-12 hours on a continuous basis. With a power range up to 8 Hp (6 kW), these pumps are used in a variety of applications from sewer jetting, pressure washing, car wash, misting/fogging, dust suppression, odor control, fire suppression, liquid CO2 and other industrial applications. Flow range is up to 4.7 GPM (18 L/min) and pressure range is up to 3,000 PSI (200 Bar). Temperature range is up to 195 °F (90 °C).
<< Learn More >>
|
 |
P300 Series Pumps
Using the same tolerances as our German partners, Giant manufactures this American-made triplex plunger pump. Because of the many unique end-uses for this pump, we offer a variety of accessories to adapt to a multitude of applications. See our P300 selection guide for product offerings. These pumps are made for medium duty applications, but are often used for 10-12 hours on a continuous basis. With a power range up to 10 Hp (7.6 kW), these pumps are used in a variety of applications from sewer jetting, pressure washing, car wash, misting/fogging, dust suppression, odor control, fire suppression, liquid CO2 and other industrial applications. Flow range is up to 5.8 GPM (22L/min) and pressure range is up to 4,000 PSI (275 Bar). Temperature range is up to 195 °F (90 °C).
<< Learn More >>
|
 |
P400 Series Pumps
Using the same tolerances as our German partners, Giant manufactures this American-made triplex plunger pump. Because of the many unique applications for this pump, we offer a variety of accessories to adapt to a multitude of applications. See our P200 selection guide for product offerings. These pumps are made for medium duty applications, but are often used for 10-12 hours on a continuous basis. With a power range up to 8 Hp (6 kW), these pumps are used in a variety of applications from sewer jetting, pressure washing, car wash, misting/fogging, dust suppression, odor control, fire suppression, liquid CO2 and other industrial applications. Flow range is up to 4.7 GPM (18 L/min) and pressure range is up to 3,000 PSI (200 Bar). Temperature range is up to 195 °F (90 °C).
<< Learn More >>
|
|
