|
 Our S3T - 3" Hydraulic Submersible Vortex Flow Trash Pumps is designed for jobs such as construction sites and manhole pumping where lightweight, high volume, trash pumps are needed. It has the ability to pass through a 12" opening and pump in debris laden areas. A small hole strainer is available for limiting solids to be pumped.
Quick Specs
Discharge Size: 3 Inch
Solids Handling: 2 1/2" (63 mm)
Maximum Flow: 385 GPM (1460 LPM)
Maximum Head: 76 Feet (23 Mtrs)
Hydraulic Input: 8 GPM (30 LPM) Max.
Hydraulic Pressure: 2500 PSI (170 Bar) Max.
Weight: 25 Lbs. (11 Kg)
Key Features
• Stainless Steel Vortex Flow Impeller
• Oil Lubricated Seals (can run dry)
• Variable Speed hydraulic drive
• Small overall size for use tight spaces
• Can be bolted directly into a pipeline
• Safe Hydraulic Drive can be used where electric power is hazardous or impractical
• Dependable gear type hydraulic motor
• Operates with our HT11 to HT15 power units or other hydraulic power sources capable of flows of 5-8 GPM
Specifications
WEIGHT S3T: 25 lbs. (11 kg)
S3TDI: 48 lbs. (22 kg)
HEIGHT: 14" (36 cm)
WIDTH (@ widest point): 11 3/4" (30 cm)
DISCHARGE: 3" NPT(F)
INLET FLANGE: 3", 125# ASA
SOLIDS HANDLING: 2 1/2" (63 mm)
HOSE PORTS: 1/2" NPT (F)
PUMP BODY S3T: Aluminum; S3TDI: Ductile Iron
IMPELLER: Stainless Steel
WEAR RING: Ductile Iron
SHAFT: Plated 4140 Steel
SHAFT SEAL: Carbon/Ceramic (Std)
ELASTOMERS: Buna N (Std)
HYDRAULIC OIL: 214-320 s.s.u. @ 100°F (64°C)
INPUT FLOW: Max. 8 GPM (30 LPM)
OPERATING PRESSURE: Max. 2500 PSI (170 Bar)
POWER SOURCE: Any Open Center Hydraulic System
Recommended Power Units: HT11D, HT13G, HT11DXR
Full Specifications
|
