|
 The S3TR model is designed for difficult pumping jobs where stringy solids are present. A fully recessed vortex impeller allows this pump to handle difficult solids found in sewage applications. It has the ability to pass through a 12 inch opening and continue to pump in debris laden job sites.
Quick Specs
Discharge Size: 3" NPT(F)INLET
Solids Handling: 2 1/2" (63 mm)
Maximum Flow: 360 GPM (1363 LPM)
Maximum Head: 69 Feet (21 Mtrs)
Hydraulic Input: 8 GPM (30 LPM) Max
Hydraulic Pressure: 2500 PSI (170 Bar) Max.
Weight: 28 lbs. (13 kg)
Key Features
• Stainless Steel Vortex Flow Impeller
• Oil Lubricated Seals (can run dry)
• Variable Speed hydraulic drive
• Small overall size for use tight spaces
• Can be bolted directly into a pipeline
• Safe Hydraulic Drive can be used where electric power is hazardous or impractical
• Dependable gear type hydraulic motor
• Operates with our HT11 to HT15 power units or other hydraulic power sources capable of flows of 5-8 GPM
Specifications
WEIGHT S3TR: 28 lbs. (13 kg)
S3TRDI: 56 lbs. (25 kg)
HEIGHT: 15" (38 cm)
WIDTH (@ widest point): 11 3/4" (30 cm)
DISCHARGE: 3" NPT(F)
INLET FLANGE: 3" 125# ASA
SOLIDS HANDLING: 2 1/2" (63 mm)
HOSE PORTS: 1/2" NPT (F)
PUMP BODY S3TR: Aluminum
S3TRDI: Ductile Iron
IMPELLER: Stainless Steel
WEAR RING, Ductile Iron
SHAFT: Plated 4140 Steel
SHAFT SEAL: Carbon/Ceramic (Std)
ELASTOMERS: Buna N (Std)
HYDRAULIC OIL: 214-320 s.s.u. @ 100°F (64°C)
INPUT FLOW: Max. 8 GPM (30 LPM)
OPERATING PRESSURE: Max. 2500 PSI (170 Bar)
POWER SOURCE: Any Open Center Hydraulic System
Recommended Power Units: HT11D, HT13G, HT11DXR
Full Specifications
|
