|
 The S4THL - 4" Hydraulic Submersible Vortex Flow Trash Pump has proven to be an excellent sludge pump. Primary uses for this pump are: oil refinery wastes, sewage digester clean-out, water waste sludge and de-silting applications using divers. This versatile pump offers solids handling and high head
Quick Specs
Discharge Size: 4 Inch
Solids Handling: 3 Inch (75 mm)
Maximum Flow: 1000 GPM (3800 LPM)
Maximum Head: 215 Feet (66 M)
Hydraulic Input: 30 GPM (114 LPM) Max.
Hydraulic Pressure: 3000 PSI (204 Bar) Max.
Weight: 179 Lbs. (75 Kg)
Key Features
• Fully Recessed Vortex Impeller (will pass 3 1/2" semi-solids)
• Wide Range of Performance
• Variable Speed hydraulic drive
• Oil Lubricated Seals (can run dry)
• Dependable gear type hydraulic motor
• Can be bolted directly into a pipeline or fitted with a suction hose for underwater dredging
• Safe Hydraulic Drive can be used where electric power is hazardous or impractical
• Operates with our HT50 to HT75 power units or other hydraulic power sources capable of flows of 15 - 30 GPM
Specifications
WEIGHT: (Aluminum)179 lbs. (75kg)
(Ductile Iron) 324 lbs. (147 kg)
HEIGHT: 34 1/2" (88 cm)
WIDTH (@ widest point): 25 1/2" (65 cm)
DISCHARGE: 4", 125# ASA Flange
INLET FLANGE: 4", 125# ASA
SOLIDS HANDLING: 3 1/2" (9 cm)
HOSE PORTS: 1" (-16) SAE
PUMP BODY: (S4THL) Heat Treated Aluminum
(S4THLDI) Ductile Iron
IMPELLER: Stainless Steel
WEAR RING and WEAR PLATE, Stainless Steel
SHAFT: Stainless Steel
SHAFT SEAL: Carbon/Ceramic (Std)
Silicon Carbide (Optional)
ELASTOMERS: Buna N (Std)
HYDRAULIC OIL: 214-320 s.s.u. @ 100°F (64°C)
INPUT FLOW: Max 30 GPM (114 LPM)
OPERATING PRESSURE: Max 3000 PSI (204 Bar)
POWER SOURCE: Any Open Center Hydraulic System
Recommended Power Units: HT60DCV, HT60DJV
Full Specifications
|
