|
 The S6105 - 4" Hydraulic Submersible High Performance Solids Handling Pumps is designed for applications where high heads and the ability to handle solids is required. A typical use for this pump would be as a temporary sewage lift station where force main pressures are encountered.
Quick Specs
Discharge Size: 4 Inch
Solids Handling: 3 Inch (75 mm)
Maximum Flow: 1650 GPM (6240 LPM)
Maximum Head: 310 Feet (95 M)
Hydraulic Input: 70 GPM (265 LPM) Max.
Hydraulic Pressure: 2500 PSI (170 Bar) Max.
Weight: 625 Lbs. (283 Kg)
Key Features
• Balanced High Efficiency Two Vane Closed Channel Impeller
• Will pass 3" (75 mm) semi-solids
• Variable Speed hydraulic drive provides a wide range of performance
• Oil Lubricated Seals (can run dry)
• High Efficiency Balanced Vane hydraulic motor
• Can be bolted directly into a pipeline or used as a booster pump
• Safe Hydraulic Drive can be used where electric power is hazardous or impractical
• Operates with our HT100 to HT150 power units or other hydraulic power sources capable of flows of 50 - 70 GPM
Specifications
WEIGHT: 625 lbs. (283 kg)
HEIGHT: 36" (91 cm)
WIDTH (@ widest point): 25" (64 cm)
DISCHARGE: 4", 150# ANSI Flange
INLET: 4", 150# ANSI Flange
SOLIDS HANDLING: 3" (75 mm)
HOSE PORTS: 1-1/4" Code 61 Flange or 1-1/2" NPT (F)
PUMP BODY: Ductile Iron
IMPELLER: Ductile Iron
WEAR RING: Ductile Iron
SHAFT: 17-4 PH Stainless Steel
SHAFT SEAL: Silicon Carbide
ELASTOMERS: Buna N (Std)
HYDRAULIC OIL: 214-320 s.s.u. @ 100°F (64°C)
INPUT FLOW: Max 70 GPM (265 LPM)
OPERATING PRESSURE: Max 2500 PSI (170 Bar)
POWER SOURCE: Any Open Center Hydraulic System
Recommended Power Units: HT150DV, HT150DJV
Full Specifications
|
