|
 The S6CSL - 6" Hydraulic Submersible Sand/Slurry Pump with Agitator is designed to use in applications requiring settled solids to be put into suspension and pumped with the discharge water. Primary applications include de-silting waterways. Other jobs may include filling sand bags to prevent beach erosion, tank and digester cleaning or pumping sediment from caissons.
Quick Specs
Discharge Size: 6 Inch
Solids Handling: 1 1/2 Inch (38mm)
Maximum Flow: 1250 GPM (4730 LPM)
Maximum Head: 135 Feet (41 M)
Hydraulic Input: 28 GPM (106 LPM) Max.
Hydraulic Pressure: 2800 PSI (190 Bar) Max.
Weight: 495 Lbs. (224 Kg)
Key Features
• Hardened Alloy Wear Parts
• Built-in Agitator for stirring up solids
• Oil Lubricated Seals (can run dry)
• Variable Speed hydraulic drive
• Small Size allows pump to fit through a 22 inch opening
• Safe Hydraulic Drive can be used where electric power is hazardous or impractical
• Dependable gear type hydraulic motor
• Operates with our HT50 to HT75 power units or other hydraulic power sources capable of flows to 28 GPM
Specifications
WEIGHT: 495 lbs. (224 kg)
HEIGHT: 39" (99 cm)
WIDTH (@ widest point): 21 1/4" (54 cm)
DISCHARGE: 6" NPT
SOLIDS HANDLING: 1 1/2" (38 mm)
HOSE PORTS: 1" NPT (F)
VOLUTE*: Hardened Ductile Iron
IMPELLER: High Chrome Alloy
WEAR PLATE: High Chrome Alloy
AGITATOR: High Chrome Alloy
SHAFT: Stainless Steel
SHAFT SEALS: (upper) Silicon Carbide; (Lower) Silicon Carbide
HYDRAULIC OIL: 214-320 s.s.u. @ 100°F (64°C)
INPUT FLOW: Max 28 GPM (106 LPM)
OPERATING PRESSURE: Max 2800 PSI (190 Bar)
POWER SOURCE: Any Open Center Hydraulic System
* Optional NI-Hard volute available for highly abrasive applications
Full Specifications
|
