|
 The S6T Hydraulic Submersible Vortex Flow Trash Pump is our most popular 6" Pump. It is lightweight, compact and able to pass large solids, stringy materials and slurries with entrained gases. This versatile top discharge pump is designed for sewer by-pass jobs, digester cleaning, plant intake de-silting and inline pumping.
Quick Specs
Discharge Size: 6 Inch
Solids Handling: 5 Inch
Maximum Flow: 1600 GPM (6000 LPM)
Maximum Head: 110 Feet (33.5 M)
Hydraulic Input: 26 GPM (98 LPM) Max.
Hydraulic Pressure: 3000 PSI (204 Bar) Max.
Weight: 195 lbs. (88 kg)
Key Features
• Fully Recessed Vortex Impeller (will pass 5" semi-solids)
• Variable Speed hydraulic drive provides a wide range of performance
• Oil Lubricated Seals (can run dry)
• Dependable gear type hydraulic motor
• Can be bolted directly into a pipeline or used as a booster pump
• Safe Hydraulic Drive can be used where electric power is hazardous or impractical
• Optional silt jetting ring is available for agitating solids into suspension
• Operates with our HT50 to HT75 power units or other hydraulic power sources capable of flows of 15 - 30 GPM
Specifications
WEIGHT: Aluminum, 195 lbs. (88kg); Ductile Iron, 340 lbs. (154 kg)
HEIGHT: 38" (96 cm)
WIDTH (@ widest point): 25" (63 cm)
DISCHARGE: 6" NPT(F)
INLET FLANGE: 6", 125# ASA
SOLIDS HANDLING: 5" (125 mm)
HOSE PORTS: 1" (-16) SAE
PUMP BODY: (S6T), Heat Treated Aluminum; (S6TDI) Ductile Iron
IMPELLER: Stainless Steel
WEAR RING and WEAR PLATE: Stainless Steel
SHAFT: Stainless Steel
SHAFT SEAL: Carbon/Ceramic (Std), Silicon Carbide (Optional)
ELASTOMERS: Buna N (Std)
HYDRAULIC OIL: 214-320 s.s.u. @ 100°F (64°C)
INPUT FLOW: Max 30 GPM (114 LPM)
OPERATING PRESSURE: Max 3000 PSI (204 Bar)
POWER SOURCE: Any Open Center Hydraulic System
Recommended Power Units: HT60DCV, HT60DJV
Full Specifications
|
