|
 The S6TC Hydraulic Submersible Trash Pump is a 6" discharge trash pump designed specifically to easily pass through a 22" manhole. The S6TC is offered in your choice of two motor displacements to cover a wide range of hydraulic input flows. This pump is the most versatile 6" solids handler in our line.
Quick Specs
Discharge Size: 6 Inch
Solids Handling: 3 Inch (75 mm)
Maximum Flow: 1900 GPM (7200 LPM)
Maximum Head: 125 Feet (38 M)
Hydraulic Input: 28 GPM (106 LPM) Max.
Hydraulic Pressure: 2900 PSI (197 Bar) Max.
Weight: 255 lbs. (116 Kg)
Key Features
• High Efficiency Closed Channel Impeller (will pass 3" semi-solids)
• Compact Design allows this pump to fit through a 21” opening
• Variable Speed hydraulic drive provides a wide range of performance
• Oil Lubricated Seals (can run dry)
• Adjustable Wear Ring
• Can be bolted directly into a pipeline or used as a booster pump
• Safe Hydraulic Drive can be used where electric power is hazardous or impractical
• Operates with our HT35 to HT60 power units or other hydraulic power sources capable of flows to 28 GPM
Specifications
WEIGHT: 255 lbs. (116kg)
HEIGHT: 34" (86 cm)
WIDTH (@ widest point): 20-3/4" (53 cm)
DISCHARGE: 6" NPT(F)
INLET FLANGE: 6" 125# ANSI
SOLIDS HANDLING: 3" (75 mm)
HOSE PORTS: 1" (-16) SAE
PUMP BODY: Ductile Iron
IMPELLER: Ductile Iron
WEAR RING, Ductile Iron
SHAFT: 17-4 PH Stainless Steel
SHAFT SEAL: Carbon / Ceramic (Std)
Silicon Carbide (Opt)
ELASTOMERS: Buna N (Std)
HYDRAULIC OIL: 214-320 s.s.u. @ 100°F (64°C)
INPUT FLOW: Max. 28 GPM (106 LPM)
OPERATING PRESSURE: Max 2900 PSI (197 Bar)
POWER SOURCE: Any Open Center Hydraulic System
Recommended Power Units: HT60DCV, HT60DJV
Full Specifications
|
