System
6000
The new SYSTEM
6000, a powerful hardware/software approach for data acquisition,
reduction and presentation for strain gages and related sensors
for
Stress Analysis testing.
Intertechnology offers a variety of Measurement Solutions (techniques)
to evaluate and refine designs of load bearing parts and structures
for maximum reliability in service by eliminating causes of failure.
For
More Information: 
Strain
Gauge Instrumentation
This short-form
Strain Gauge Instrumentation catalog will introduce you to our instruments,
and assist you in selecting those most appropriate to your measurement
needs.
Basic instrumentation requirements call for stability, accuracy
and high resolution when making measurements under static loading
conditions, and particularly where measurements are to be taken
over long periods of time.
If test conditions involve predominantly constant measurement signals,
the first choice for a measuring instrument will ideally incorporate
a digital or analog display, and depending on the degree of sophistication,
output to printer, microprocessor or computer. Multi-channel capability
can be provided by manual or automatic switching/multiplexing units,
which may include balance and/or span control facilities. Many strain
indicators have an analog output available for making single-channel
measurements in conjunction with, for example, an oscilloscope,
recorder, peak-read indicator, or analog-to-digital converter. However,
this capability may have limitations with respect to frequency response
and amplifier gain compared to an instruments designed specifically
for high speed measurements.
For
More Information:
Portable
Strain Indicators
Basic instrumentation
requirements call for stability, accuracy and high resolution when
making measurements under static loading conditions, and particularly
where measurements are to be taken over long periods of time.
This short form catalog will introduce you to our Portable Strain
Indicators and assist you in selecting from a wide range of reliable
products for stress analysis and materials testing.
For
More Information:
Switch
And Balance Units
The SB-10 Switch
and Balance Units provides a convenient means for strain measurement
when more than one strain gage is involved. While designed for use
primarily with the Measurements Group P-3500 Strain indicator, the
SB-10 can also be used with other types of strain indicators.
The SB-10 features gold-plated push/clamp binding posts to allow
fast, convenient and reliable connection of input circuits, and
individual ten-turn locking potentiometers with turns-counting dials
for fine-balance adjustment.
The channel selector switch of the SB-10 has negligible switch resistance,
and provides an open position to allow the use of additional SB-10's
with a single strain indicator. The SB-10 also incorporates a common
dummy position for use with other that 120- or 350-ohm strain gages.
Ideal for use in harsh environments.
For
More Information:
