Static Elimination: Eliminate Static And Blowoff Dust With Ionized Compressed Air

Achieve static elimination with the Silent X-Stream™ Air-Blade™ Air Knife Ionizer from Nex Flow™. Easily eliminate static and blowoff dust with ionized compressed air with an air knife ionizer. The Silent X-Stream™ Air-Blade™ Air Knife Ionizer provides increased efficiency and very low noise levels compared to the Standard Air Blade™ Air Knife Ionizer for static elimination. Both units utilize the quality Haug static bars, the RN bar for most applications or the extra strong VS bars (Triple X versions) for very haigh static charges and extremely high speeds.

Static elimination is achieved with the Silent X-Stream™ Air-Blade™ Air Knife Ionizer which uses a small amount of compressed air for a powerful, and adjustable force with "laminar" flow to eliminate static charges in applications where static bars cannot reach or where high speeds are a factor.

Normally the Standard Model RN Haug brand static bar can address most applications. For extremely high speeds and high charges the extra powerful VS model is used. For washdown applications (such as pharmaceutical areas), even a washable model is available at extra cost.

All Haug static bars come with a patented safety connector and fully shielded cable. The power supplies are "repairable" and are so well made, that we offer a two year warranty on them (one year on the bars).

Static Elimination: Silent X-Stream™ Air-Blade™ Air Knife Ionizer Features:

• Connections on the back or ends

• It flows from end to end (full flow).

• Stainless steel models are available for high temperature and corrosive models.

• Models are designed for easy cleaning and prevention of dirt entering the static bar, minimizing potential damage.

• Patented connectors with the ground intrinsic to the cable design.

• Instant ON/OFF with no moving parts.

• Repairable Power Supply with a two year warranty.

Static Elimination: Silent X-Stream™ Air-Blade™ Ionizer Static Benefits:

• Flexible mounting options.

• Units can be mounted end to end for longer lengths with no air gap.

• High temperature, extra strength, and even a unique washable stainless steel model is available for special applications or as required.

• Ease of cleaning and maintenance.

• No separate ground connection that can be cut and cause sparks or accidentally shock personnel.

• Conserves air use when not required.

• Eliminates one costly area which is power supply replacement. 2 year warranty assure quality product.

	X-Stream™ Air-Blade™ Air Knife Ionizer
	Maintenance & Installation
	Price List

Applications:

Typical applications replace expensive, high maintenance ionizing blower systems and are particularly advantageous in intermittent applications.

• Automotive
  Neutralize and blow off dust from auto bodies to plastic parts prior to painting.

• Bottling
  Clean bottles of dust prior to labeling. Keeps bottles neutralized which may attract dust prior to filling or packaging.

• Food
  Neutralize charges in all sorts of plastic packing materials and containers to prevent and/or minimize dirt contamination.

• General Manufacturing
  When dealing with any plastic parts or materials, static can cause jamming of machinery, dirt contamination, or be a personnel hazard.

• Paper
  Static charge and buildup in high speed paper production can cause quality problems and effect machine speed. If static bars cannot be mounted close, or if dirt is a problem due to static “dirt attraction”, our products can often address the problem.

• Plastic
  As with paper, the same problems can arise often more critical, even at lower speeds.

• Printing
  Whether it is a flat web or bottle printing, dirt on the surface can effect the final product. Our products can often dramatically improve the quality by removing dirt buildup due to static.

• Pharmaceutical
  Static buildup especially in packaging can attract unwanted dust both on the product and on the packaging. Our products can address many of these applications.

• Textile
  Static buildup in the textile industry can be often addressed when placement of the static bars cannot be close to the product.