Functional Devices, Inc.

Process Controls Index
Process Controls Index

Site Search

Functional Devices, Inc.

Functional Devices, Inc. has been manufacturing quality electronic devices in the United States of America since 1969. Current product offerings include prepackaged relays, current sensors, power control, enclosures, power supplies, transformers, and accessories. Functional Devices has established itself as a leader in the HVAC, Building Controls, and Energy Management industries.

	Relays Prepackaged for Convenience LED indicator Multi-voltage coil input Several different contact ratings True override switch on load side of relay High/low voltage separation Great Time Saver
	Network Compatible Devices RIB® BACnet, LonWorks,and Ethernet Network Compatible Devices can be hard wired and used instead of more expensive multi-output controllers when a few more control points are needed, and large controllers are too much for the job. They can also be used when control points are widely spread throughout the job site. These devices have been prepackaged to save the installer the time, trouble, and expense of buying separate components and assembling them on the job. Functional Devices also offers WiFi, Zigbee, AIC, and EnOcean WIRELESS Network Compatible Devices that can act singly as a (LCS) load control switch or as part of a larger network.
	Wireless Devices Short Range Wireless Devices EnOcean® enabled wireless relay receivers in both 120 and 277 Vac models work in conjunction with many switching devices that are EnOcean® enabled with 315 MHz transmitters. Wireless wall switches, occupancy sensors, thermostats, key card switches, patio door switches, and one-way controller transmitters are all devices which can activate the RIB® wireless control relays by using EnOcean®'s "energy harvesting" technology. Energy harvesting refers to the process by which energy is captured and stored, then used to transmit a wireless signal, which in turn is received by RIB®'s wireless relay. Short / Extended Range Wireless Devices The wireless products manufactured by Functional Devices® using AIC Wireless® components are readily available for any building automation, control or monitoring application. The devices are a reliable, low-cost method to extend your network; and an alternative to long runs of communications to previously unreachable locations, due to the lack of existing communications architecture. Functional Devices® models are shipped ready to install, with a true plug-and-play set-up requiring no special programming or commissioning tools. With applications deployed within a few hundred feet to over 6 miles, Functional Devices® long-range wireless products have the solution to any controls or monitoring project.
	Current Sensors Many Variations Miniature Size Self-calibrating Relay / current sensor combinations Adjustable or fixed Track Mount Styles Solid or split core Voltage outputs 4-20 mA regulation
	Power Control Enclosed Power Control Centers Two 120 Vac grounded convenience outlets 4 or 10 Amp Switch / circuit breaker Outlets can be continuously powered or controlled by the switch / circuit breaker Auxiliary outputs are provided for convenient control panel installations Track Mount Circuit Breaker Switches Track mount circuit breaker switches provide a convenient addition to control panels Circuits can be low voltage (24 Vac) or line voltage (120 Vac) Prepackaged Switches Standard configurations to provide simple switching schemes Labels can be ordered with custom content to fit your project UPS Interface Functional Devices provides a 550 VA commercial UPS along with an enclosure and an interface board, which allows the installer to hardwire line voltage to the provided UPS while giving the ability to hardwire the UPS to the final load.
	Power Supplies AC & DC Class 2 On/off control Overcurrent protection LED power indicator High/low voltage separation 120 Vac convenience outlets 40-500VA AC models Finger-safe terminals PSH300A & PSH500A - Perfect for VAV applications 5 or 3 isolated 100 VA outputs On/off circuit breaker switch for each output UL Listed Class 2 Fully enclosed - perfect for central location
	Transformers US manufactured line UL Listed Class 2 20 VA - 375 VA Foot or hub mounting Single or dual hub Split bobbin construction Circuit breaker available
	Enclosures UL Listed NEMA 1 NEMA 4 Variety of sizes Numerous knock outs Full hinge Key locks
	Accessories Subpanels Mounting supplies Replacement parts
	Half-Light® Controllers Plug and Play Energy Savings Device for Lighting Provides independent control for multiple ballast light fixtures Use with existing wall switch No extra wiring

For more information on Functional Devices visit Alpha Controls And Instrumentation.