ACCU,VENT,Automatic,Degassing,Valves

ACCU-VENT
Automatic Degassing Valves


  Home | About Us | Contact | New Products

Pumps
 ARO Pumps
 Caster Pumps
 Flux Pumps
 Gidding & Lewis
 Grundfos

 Pulsafeeder

 Promag
 Viking Pump
  
Calibration Cylinders
 Primary Fluid Systems Inc
  
Corporation Stops
 Primary Fluid Systems Inc
  
Flow Meters
 Burkert Contromatic
 Hays
 Kobold
 
Lake Monitors

  
Injection Quills
 Primary Fluid Systems Inc
  
Mixers
 Midwest Mixing
 TAH Industries
 
Pulsation Dampeners
 ARO Pumps
 
Primary Fluid Systems Inc
  
Pressure
 Winters Thermoguages
 
Strainers
 Hayward Industrial
 
Valves
 Burkert Contromatic
 Dynalfluid 2000
 Primary Fluid Systems Inc
 
Web Site & Email
 Web Site
 Email Us
 
Web Site Tools
 



 
  ACCU-VENT Automatic Degassing Valves

ACCU-VENT Automatic Degassing Valves
Designed to improve the performance and safe operation
of most pumps used for metering applications.

ACCU-VENT Automatic Degassing Valves are designed to automatically vent gases and vapors that are commonly released from chemicals such as Sodium Hypochlorite or Hydrogen Peroxide or Sulfuric Acid.

Standard Features:
• CPVC (Corzan) and Viton corrosion resistant wetted materials of construction
• specially designed float material that automatically vents built up gases on system start up and under working pressure
• can be used on feed side or discharge side of pump (or both)
• standard 1/2" NPT threaded connections or optional 3/4" NPT
• available in other materials of construction for various gaseous liquid chemicals

Gases or vapor are compressible, and if not vented cause what is known as vapor lock in your metering pump and the system, causing the metering pump to malfunction and in most cases the pump to stop discharging chemical to the system.

The valve is designed to allow for the venting of gases and condensed vapor back to the feed tank, which improves priming on initial startups and continuous trouble free operation while working under pressure.

The valve when in operation vents gases, vapor and a small amount of liquid, which is the same as the chemical being pumped. This discharge must be returned through hard piping or tubing back to tank, to prevent personnel or equipment from coming in contact with the vented corrosive liquid.

Special Features
• CPVC (Corzan) and Viton corrosion resistant wetted materials of construction
• Special material designed float automatically vents built up gases on system startup and under working pressure
• Can be used on feed side or discharge side of pump (or both)
• Standard 1/2" NPT threaded connections or optional 3/4" NPT
• Available in other materials of construction for various gaseous liquid chemicals.

Degassing Valves ACCU-VENT Literature Instruction Manual
Cad Drawings Dimensional Drawings


  Home | About Us | Contact | New Products

ACCU-VENT
Automatic Degassing Valves


Site Designed By Panther Marketing & Design