 Aluminum
Positive Displacement Flow Meter
Sizes and Flow Ranges:
Multipulse With and Without
Flange |
|
Size
|
Flow
Range
|
|
15mm
(½")
|
10~500
L/hr
(2.6~130 gal/hr)
|
|
20mm
(¾")
|
100~1500
L/hr
(26~396 gal/hr)
|
|
25mm
(1")
|
120~3000
L/hr
(32~790 gal/hr)
|
|
40mm
(1½")
|
250~8000
L/hr
(56~2115 gal/hr)
|
|
50mm
(2")
|
700~20,000
L/hr
(185~5280 gal/hr)
|
Aluminum Positive
Displacement Flow Meter Material:
- Aluminum body and manifold
- PEEK piston and bearing (polyetheretherketone)
- Special materials contact
us
Aluminum Positive
Displacement Flow Meter Specifications:
Cut-away showing flow through
meter |
| Process
Connections: |
Threaded
BSPP/NPT female thread, flanged to ANSI/DIN standards (lap
joint flanges) |
| Pressure
Rating: |
20~80
bar (300~1200psi) |
| Temperature
Rating: |
-40~150°C
(-40~300°F) |
| Multipulse
Outputs: |
Both
reed switch & NPN open collector outputs* are standard. |
Two
Pulse Outputs
Two Pulse Outputs (standard)
|
1. Reed
Switch Output
Provides a voltage free contact closure. The reed switch is
classed as a "simple device" and can be used in hazardous areas
when connected via an approved intrinsically safe barrier.
2. Square Wave Output
An open collector pulse output produced by a solid state hall
effect device. This three wire device requires 5~24Vdc excitation
voltage and produces a high resolution square wave output.
Options
- Explosion Proof terminal housing
- Integral or remote high speed
preset batch controller
- Integral or remote battery
powered flow rate totaliser with scaled pulse output, analog
and flow alarm outputs
Typical
Applications
Flow Meter With Rate Totaliser |
Metering petroleum products,
diesel fuel oil, lubrication oil,hydraulic oil, kerosene, gasoline,
alcohol, solvents, laquers and grease.
Multipulse Positive
Displacement Flow Meter Styles:
Stainless
| Aluminum
| High Pressure
| Hygenic
| PVC | Trimec
|
