 High
Pressure Positive Displacement Flow Meter
Sizes and Flow Ranges:
High Pressure Flow meters |
|
Size
|
Flow
Range
|
|
15mm
(½")
|
10~500
L/hr
(2.6~130 gal/hr)
|
|
20mm
(¾")
|
100~1500
L/hr
(26~396 gal/hr)
|
|
25mm
(1")
|
120~3000
L/hr
(32~790 gal/hr)
|
|
40mm
(1½")
|
250~8000
L/hr
(56~2115 gal/hr)
|
|
50mm
(2")
|
700~20,000
L/hr
(185~5280 gal/hr)
|
High Pressure Positive
Displacement Flow Meter Material:
- 316 stainless steel body and
manifold
- PEEK piston and bearing (polyetheretherketone)
High Pressure Positive
Displacement Flow Meter Specifications:
Cut-away showing flow through
meter |
| Process
Connections: |
Threaded
BSPP/NPT female thread, flanged to ANSI/DIN standards (specials
contact us) |
| Pressure
Rating: |
Up
to 350 bar maximum (5150 psi). |
| Temperature
Rating: |
-40~120°C
(-40~250°F) |
| Multipulse
Outputs: |
Both
reed switch & NPN open collector outputs* are standard. |
Two
Pulse Outputs
Two Pulse Outputs (standard)
|
1. Reed
Switch Output
Provides a voltage free contact closure. The reed switch is
classed as a "simple device" and can be used in hazardous areas
when connected via an approved intrinsically safe barrier.
2. Square Wave Output
An open collector pulse output produced by a solid state hall
effect device. This three wire device requires 5~24Vdc excitation
voltage and produces a high resolution square wave output.
Options
- Explosion Proof terminal housing
- Integral or remote high speed
preset batch controller
- Integral or remote battery
powered flow rate totaliser with scaled pulse output, analog
and flow alarm outputs
Typical
Applications
Flow meter With Rate Totaliser |
Hydraulics, lube oil, mercaptan,
petroleum, deionised water, resiins, MEK, ethylene oxide, oil
and gass industry, injection of chemical and bonding solutions.
Multipulse Positive
Displacement Flow Meter Styles:
Stainless
| Aluminum
| High Pressure
| Hygenic
| PVC | Trimec
|
