Pressure products
designed for industrial use and presented by
Cyronix Instrumentation & Controls Transducer,
Transmitters,
Gauges
and Molding
can be found by clicking the link. A wide range
of units designed for the toughest measurement
applications in the worst environments. Pressure
Transducer applications include hydraulic, pneumatic,
oil services, vehicle test stands, die casting,
autoclave, turbines, etc.
Pressure Transducer
PT130/PT140/PT150/PT160
100 Series Hydraulic/Pneumatic
models are for extreme environments of hydraulic
applications and corrosive media. The contoured
sensing diaphragm ensures greater accuracy and
provides longer operating life. Internal shunt
calibration provides quick system calibration.
A choice of 3 mV/V, 5 V, 10 V or 4 to 20 mA
outputs.
PT139/PT139A
Completely
sealed and welded, PT139 for the most stringent
demands of vehicle testing and survive. Pressure
Transducer offers reliable operation at ranges
from 0 - 15 to 0 - 10,000 psi at 3 mV/V full
scale output. An internal shunt calibration
provides quick transducer and system calibration.
PT273/PT274/PT275/PT276
PT270
General Purpose Series provides outstanding
performance under the severe demands of measuring
the injection ram and clamp pressure of injection
molding machines. Superior performance specifications
include an unprecedented 0.25% accuracy, temperature
effects of ±0.005% full scale/°F
on zero and span, and RFI/EMI protection that
meets IEC 801 - 3 standards.
PT311JA
Dynisco PT311JA Flush Diaphragm
Model designed for applications requiring a
zero volume port. The flush diaphragm improves
frequency response and has excellent cleanability.
PT332C
Subminiature
Model, offers a full line in pressure ranges
from 500 to 10,000 psi. The subminiature design
provides a product that can be readily installed
in hard to get at locations.
PT338
PT338
High Temperature Test Model withstands the most
extreme operating conditions including temperatures
as high as 310ºF. Its extremely tight thermal
characteristics include temperature effects
on zero and span of ±0.004% full scale/ºF
from -40ºF to +300ºF.
PT375
PT375
Flush Diaphragm model is designed for applications
requiring a zero volume pressure port, fast
response time and stringent cleanability standards.
PT390
The
PT390 Oil Field model is available in ranges
from 5,000 to 20,000 psi. The sensing diaphragm
utilizes high resistance foil strain gages coupled
to a sealed amplifier module. The module produces
a 2 - wire, 4 to 20 mA output signal proportional
to applied pressure. Specifically designed to
withstand aggressive oil field applications,
the PT390 meets NEMA 4X environmental standards.
Wetted parts are made from Inconel X - 750 to
meet NACE standard MR - 01 - 75 for sour gas
service.
PT830/850/860
General
Purpose Models 830, 850 and 860 provide a flexible
design and a measurement accuracy of ±0.50%
full scale output. Interchangeable configuration
allows users to specify the pressure range,
pressure port and output level that meet specific
application requirements.
PT831/851/861
High
Accuracy, General Purpose model,
± 0.25% Accuracy.
PT832
High
Accuracy model, ± 0.15% Accuracy.
PT840/841
Models
for Hazardous Areas.
PT840-8
Flush
Diaphragm, Loop Powered Model.
