|
 Ionization Bar EI-VS
The HAUG Ionization Bar is a powerful and strong piece of equipment.
Its construction satisfies all machine construction requirements and
it has proven its value time and time again in the removal of electrostatic
charges during roll, sheet and web (continuous product) processing.
Product-interfering surface charges can be removed reliably and effectively
- even at high operating speeds - with a HAUG Ionization Bar unit.
 |
Ionization Bar type EI-VS
The HAUG Ionization Bar type
EI-VS reliably removes electrostatic charges and its performance,
when compared to the standard version, is considerably enhanced.
The Ionization Bar type EI-VS
has all the features which characterize HAUG Ionization Bars, especially the reliable and removable contact system,
the screened high voltage cable, the absolute contact safety
and special electrodes made from special steel.
|
 |
|
| |
 |
|
The electrical
capacity is three times as great as that of the standard version
and it therefore necessary to base any calculations of a power
pack loading on a bar length three times as long.
Example: EI-VS 50 cm with
200 cm cable
Power pack loading: 3 x 50 cm + 200 cm = 350 cm
|
|
|
|
|
Industries
using this technology :
Plastic processing industry:
Foil processing, packing machines, foil extruders
etc.
Textile industry:
Weaving and spinning mills, textile finishing
plants etc.
Graphic
industry:
Screen and tampon printing machines, photographic
and film processing machines,
folding machines etc.
Painting/spraying workshops:
Car painting/spraying, painting/spraying of
plastic components etc.
|
|
|
| Accessories: |
 |
 |
|
|
|
|
Bar holders:
|
|
Technical
data EI-VS:
| Diameter: |
18 mm / 20
mm |
| Bar length: |
Von 150 -
2.500 mm |
| High voltage
cable: |
Standard
length 2 m, permanent |
| Max. ambient
temperature: |
+50°C |
| Suitable
bar holder: |
Klick-Zack
Order.-Nr. 10.0004.000
Bar holder Order.-Nr. 10.0301.000 |
| Ionization Bar EI-VS: |
Order.-Nr.
03.8020.000 |
TWe reserve the right to
effect technical modifications!
Suitable power supply parts:
| EN-SL |
01.7780.000 (230 V) |
01.7781.000 (115 V) |
| EN-8 |
01.7757.000 (230 V) |
01.7756.000 (115 V) |
| MULTISTAT |
01.7760.000 (230 V) |
01.7759.000 (115 V) |
| EN-70 |
01.7701.000 (230 V) |
01.7700.000 (115 V) |
Max. permissible load of
power supply unit:
| EN-SL |
approx. 5 m |
| EN-8 |
approx. 15 m |
| MULTISTAT |
approx. 15 m |
| EN-70 |
approx. 2 x 15 m |
|
|
|
Technical
illustration:
|
|
