|
Ionizing
Bar EI-RN
The HAUG Ionizing Bar are a powerful and strong piece of equipment.
Its construction satisfies all machine construction requirements
and it has proven its value time and time again in the removal of
electrostatic charges during roll, sheet and web (continuous product)
processing.
Product-interfering surface charges can be removed reliably and
effectively - even at high operating speeds - with a HAUG Ionizing
Bar unit.
 |
Ionizing
Bar EI-RN
The HAUG Ionizing Bar type
EI-RN is a powerful and strong piece of equipment. Its
construction satisfies all machine construction requirements
and it has proven its value time and time again in the
removal of electrostatic charges during roll, sheet and
web (continuous product) processing. Product-interfering
surface charges can be removed reliably and effectively
- even at high operating speeds - with a HAUG ionizing
unit. |
Discharge
Optimum effektiv
distance = 20-30 mm |
|
|
|
| |
The coaxial high voltage plug
connector of the HAUG SYSTEM X2000 (Fig, 3) offers a unique
advantage in that the gas-tight, high voltage plug can be connected
to the HAUG power supply unit easily and without the need for
any tools. The highly flexible, coaxially screened safety cable
connects the ionizing unit with the voltage supply (Fig. 4). |
| |
Fig. 3 |
Fig. 4 |
|
| |
The round construction of the
ionizing bar type EI-RN permits rotatable and millimetre-exact
adjustment in the direction of travel
of the material. The ionizing bar is safe to touch, while wear-resistant
special electrodes guarantee long life. |
|
|
|
Recommendations:
HAUG Ionizing Bar is used with
machines in the packing, foil, printing and textile industry,
as well many other industrial applications. It is recommended
that two ionizing bars are installed above and underneath the
material web.
The Ionizing Bar is suitable
for machine speeds up to 100 m/min.
|
|
|
|
Further
types of bars available:
 EI-RNE
(03.8007.000)
as EI-RN, but with high voltage connection at the end of the
bar
for series connection of
ionizer units.
EI-RA (03.8006.000)
without high voltage cable, suitable for connection of a highly
flexible, separate high voltage connecting cables (type VK-Norm,
VK-ATL etc.)
EI-RNE (03.8008.000)
as EI-RA, but additionally with high voltage connection at the
end
of the bar for series connection of ionizing units. |
 |
Accessories:
|
Download
Spec Sheet
|
