Arkal,Sand,Separator,Batteries

Arkal Sand Separator Batteries

 Home |  Product Directory | New Products | Contact Pelmar

 

Products by Category

  Compressed Air
  Air Amplification Nozzles
  Air Jets
  Air Knife/Airflow Amplifier

  Airflow Amplifiers
  Cabinet Coolers
  Cold Air Gun Spot Cooling
  Cold Pump Air Conditioner
  Dry Vacuums
  Filters/Water Traps/Press. Reg.
  Hot Air Gun Spot Heating
  Sprayvector Air/Liquid Sprayers
  Solids & Liquids Separator
  Static Removal Ionizing Curtain
  Vortex Enclosure Coolers
  Vortex Mancooling/Manheating
  Vortex Sewing Needle Cooler
  Vortex Tubes
  Wet Vacuums

  Heat Exchangers
  Compact Cabinet Coolers
  Drip-In Heat Exchangers


 Filtration
 Water Filters Disc

  Disc Filtration
  Disc Filters
  Compact 2" System
  Batteries Automatic
  Galaxy Automatic

 Water Filters Screen
  Automatic Screen Filters
  B Series Compact Self Cleaning
  E Series Electric Piston Operated
  H Series Hydraulically Operated
  SE Series Electric Gear Operated
  Minitwist Filters


 Water Filtration
  Plastic Filter Housings
  Filter Cartridges
  Pleated Filter Cartridges
  Big Bubba Filter Cartridges
  Stainless Steel Filter Cartridges
  Ultraviolet Sterilizers


 Media Filters - AGF
  Media Filtration

 Sand Filtration
 Sand Separator

 Valves
 Air Valves

  Overview
  Automatic
  Combination
  Kinetic
  For Sewage

 Water Control
  Control Valve 700
  Electrical Remote
  Pressure Reducing
  Pressure Relief
  Surge Control
  Pump Control
  Float Control
  Non-Slam Check
  Flow Control
  Altitude
  Control Valve 400
 

Manufacturer
  ARI
  Arkal
  Bermad
  Flowmatic
  ITW Vortec
  Noren Products
  Oil Skimmers
  Pelmar
 



www.pelmar-eng.com
 

  Arkal Sand Separator Batteries
Sand Separator Batteries
Size: 2" sand separator Batteries
  3" - 10" inlet/outlet manifold diameter
Capacity: Modular for different flow rates. (about 20 m3/hr per unit)
Operation: Automatic sand separation with optional built-in backup disc filtration .
Application: Used in field crops, orchards and groves.

Standard Features:
High efficiency of sand separation
Long-term operation with little maintenance
Self operating - maintenance close to zero
Corrosion resistant
Continuous flow during backflush

Special Features:
Isolation valves allow for :
1. Maximum flexibility of flow rates with maximum separation efficiency.
2. Continuous flow during individual unit maintenance.
Special design prevents erosion damages caused by the high velocity of sandy water flow.


The 2" Sand Separator battery is a modular system that separates sand from the water and collects the sand at the bottom of the system, ready to be drained.
See explanation of the sand separation process.

Sand Separator Batteries may be built with manual (or automatic) disc filter units that filtrate the residual sand particles and other solid impurities from the water.
The inlet of each filter unit is connected to the outlet of one of the sand separators and completes it's operation. Each filter unit has one filtration element composed of a stack of grooved discs.

See the explanation of Disc Filtration Technology.


The number of sand separators in the battery can range between 1 to 24, depending on the application requirements, such as the flow rate.

One sand separator unit is designed for approx; mately
20 m3/hr. Each sand separator my be isolated from the battery by 3 manual valves, which permits changing the number of functioning units if the flow rate is changed.
The 2" Sand Separator battery continuously supplies clean water to the downstream, and does not require any manual interference.

The concentrated sandy water should be flushed from time to time, depending on the load of sand in the water. On batteries that include manual filters, the filters should be manually cleaned, any time when the filters are loaded with solid impurities.
This situation can be determined when the pressure gauge shows a large difference of pressure between the inlet and outlet of the battery.

Each Sand Separator and filter are isolated from the battery with 3 manual valves, which may be closed during the manual filter cleaning, eliminating the need to stop the work of the battery and the supply of filtered water.

Process of Sand Separation Raw water tangentially flows into the 2" Sand Separator.
The tangential flow causes centrifugal forces, which in turn cause separation of the heavy sand particles from the water, throwing the sand particles toward the walls of the Sand Separator, where the particles settle down to the drain.

The clean water then flows up through the outlet port for use.

AGF Series Sand Filter

Arkal - guarantees reliable and efficient Sand Separation for years.



 Home |  Product Directory | New Products | Contact Pelmar

 

Arkal Sand Separator Batteries


Site Designed By Panther Marketing & Design