New Products from
Pelmar Engineering Ltd.

 Home |  Product Directory | New Products | Contact Pelmar

 

Products by Category

  Compressed Air
  Air Amplification Nozzles
  Air Jets
  Air Knife/Airflow Amplifier

  Airflow Amplifiers
  Cabinet Coolers
  Cold Air Gun Spot Cooling
  Cold Pump Air Conditioner
  Dry Vacuums
  Filters/Water Traps/Press. Reg.
  Hot Air Gun Spot Heating
  Sprayvector Air/Liquid Sprayers
  Solids & Liquids Separator
  Static Removal Ionizing Curtain
  Vortex Enclosure Coolers
  Vortex Mancooling/Manheating
  Vortex Sewing Needle Cooler
  Vortex Tubes
  Wet Vacuums

  Heat Exchangers
  Compact Cabinet Coolers
  Drip-In Heat Exchangers


 Filtration
 Water Filters Disc

  Disc Filtration
  Disc Filters
  Compact 2" System
  Batteries Automatic
  Galaxy Automatic

 Water Filters Screen
  Automatic Screen Filters
  B Series Compact Self Cleaning
  E Series Electric Piston Operated
  H Series Hydraulically Operated
  SE Series Electric Gear Operated
  Minitwist Filters


 Water Filtration
  Plastic Filter Housings
  Filter Cartridges
  Pleated Filter Cartridges
  Big Bubba Filter Cartridges
  Stainless Steel Filter Cartridges
  Ultraviolet Sterilizers


 Media Filters - AGF
  Media Filtration

 Sand Filtration
 Sand Separator

 Valves
 Air Valves

  Overview
  Automatic
  Combination
  Kinetic
  For Sewage

 Water Control
  Control Valve 700
  Electrical Remote
  Pressure Reducing
  Pressure Relief
  Surge Control
  Pump Control
  Float Control
  Non-Slam Check
  Flow Control
  Altitude
  Control Valve 400
 

Manufacturer
  ARI
  Arkal
  Bermad
  Flowmatic
  ITW Vortec
  Noren Products
  Oil Skimmers
  Pelmar
 



www.pelmar-eng.com
 

  New Products from Pelmar Engineering Ltd

The Model 770 Rate of Flow Control Valve is an automatic control valve designed to maintain a constant pre-set rate of flow regardless of changing system pressures and demand. It is a pilot controlled, hydraulically operated, diaphragm actuated globe valve in either the oblique (Y) or angle pattern design. Valve differential pressure powers the diaphragm actuator open or closed. The lower control chamber is connected through a fixed orifice to the downstream pressure, which serves to cushion the closing of the valve. The upper control chamber, which operates on a two-way control principle, has varying pressure produced by the rate of flow pilot and the pilot's internal upstream restriction needle valve.


 

Sump-N-Ator Chip Separator
Finally there's a fast and cost effective way to vacuum and filter used coolants and cutting oils loaded with chips from sumps, open pits and parts washers.

The Sump-N-Ator from ITW Vortec is the portable and affordable solution to the messy and lobor intensive task of cleaning machine sumps. In one easy step, the powerful sump-N-Ator pulls and filters particulate and sludge from liquids, then quickly converts to a pump to convey chip-free liquid out for reuse or disposal.

Fills or mpties a 55 gallon drum in on 1 1/2 minutes! The sump-N-Ator's superior filtration system makes it easy to separate coolant and chips for recycling, which reduces environmental impact and lowers costs.

Powered by filtered compressed air and ITW Vortec's Transvector air amplifier, there's no motor to burn out, no shock hazard, and no moving parts to break. The Sump-N-Ator is virtually maintenance free, exceptionally reliable, and much quieter to operate the a motor based vacuum or pump. It's backed by a 2 year warranty.

The unit requires no priming to operate, and installation is as simple as attaching it to a 55 gallon drum and activating the filtered compressed air. Designed with safety in mind, the Sump-N-Ator's automatic shut off valve prevents overflows and its relief valve limits internal drum pressure to 3.5 PSIG.


 

The COMO Fluid Life Oil Skimmers remove oils, grease, sludge, fatty acids and other contaminants from your water or cleaning solution.

Because of the adhesive qualities of these contaminants, they adhere to the slow rotating disc and then are removed by use of spring loaded wiper blades and discharged in a nearby container.

Water and cleaning solutions not having an adhesive factor will remain.


 Home |  Product Directory | New Products | Contact Pelmar

 

New Products from
Pelmar Engineering Ltd.


Site Designed By Panther Marketing & Design