|
Get
more filtration for the money with Flow-Max® Pleated Filter
Cartridges for high flow, long life, greater sediment removal
and reduced filtration costs.
|
Flow-Max filter cartridges
outperform wound, spun, melt blown, resin bonded
and other "depth" type filter elements because
our cartridges are pleated to provide increased surface
area and longer life.
Flow-Max filter cartridges
outperform other pleated elements because our high-performance
filter media is systematically produced using
100% synthetic fibers, with no
binders or additives to leave a residue, foam or contaminate.
|
 |
Lower pressure drop is
another significant advantage, using Flow-Max pleated
cartridges, which
allows for increased flow
rates and the use of smaller filter housings to reduce
capital equipment costs.
Our filter media is dramatically
thicker than other products. For this reason, Flow-Max
cartridges provide "depth"
filtration for greater sediment removal, along with more
surface area with our pleated design.
A multi-ply laminate is
used with our sub and one micron grades for longer life
and greater solids removal.
|
|
Specifications
Temperature range: 40ºF
- 140ºF
(4.5ºC - 60ºC)
Media: 100% chemical resistant PP, PE and PET,
with no binders or additives
Center tubes: PP (standard & BB); PVC, Jumbo
End caps: Plastisol (std & B-B); Molded, Jumbo
Packaging: All cartridges are shrink wrapped for
purity
Flow rates: see data
|
Flow-Max standard cartridges
are available in a wide rnge of micron ratings and lengths.
|
|
Flow-Max full-flow cartridges for 10" &
20" B-B housings.
|
Flow-Max jumbo cartridges for Flowmatic & Hurricane
housings.
|
|
Washable
& Reusable
Flow-Max® cartridges
are washable and reusable, five micro and up to reduce
filtration costs. For best results, direct spray into
pleats to dislodge sediment. Or, let dry and brush off
filter cake from surface of the media.
|
All
Flow-Max® cartridges are individually shrink wrapped
for purity.
|
|
Flow-Max®
- HP
All Poly Cartridges
for critical filtration and high purity water.
We now offer a complete
line of pleated polypropylene filter cartridges for a
wide variety of applications. Cartridges are made entirely
of polypropylene, including filter media, center tubes
and support materials. All components are fusion-bonded,
eliminating adhesives which can potentially leach. Cartridges
are absolute rated and exceed 99.9% efficiency at stated
micron rating. An assortment of end cap configurations
are available, including double-open-end (DOE), fin, 222
and 226 cartridges with o-ring seals. 2-1/2" OD.
For more details please see product features described
below. For temperatures to 140°F (60°C).
* Now Beta 5000 rated
Features
- 100% polypropylene
- Non-leaching, FDA listed
materials
- High throughput / lo9ng
fitler life
- Absolute rated (99.99%
Beta 5000 efficient)
- Resistant to aggressive
chemicals
- Pleated for more surface
area
- Wide range of micron
ratings
|
 |
|
Melt
Blown Polypropylene Filter Cartridges
Spun poplypropylene filter
cartridges. Ideal for aggressive chemicals and general
filtration requirements when depth filtration is required.
Available in wide range of lengths and micron ratings.
Melt
Blown Cartridge Cartridges
Cartridges rated
for temperatures to 125ºF (52ºC). Polypropylene
construction for excellent chemical resistaance. No binders,
additives, lubricants to leach to water. 5 GPM maximum
flow rate for five micro cartridge, 9-3/4" x 2-1/2"
OD.
|
 |
|
Wound
Filter Cartridges
Full line of wouond filter
cartridges offering excellent depth filtration. Available
in FDA polypropylene, 304L stainless, 316L stainless and
tin center tubes. 2.5" O.D. All cartridges are shrink
wrapped, bagged or in sleeves.
|
 |
|
Flowmatic®
Pleated
Twenty micro pleated cellulose
cartridges. 2.5" OD X 9-3/4" length. Twenty
micron impregnated cartridges. 2.5" OD X 9-3/4"
length.
|
 |
|
