 Doric 500 Series Digital Indicators are supplied in a standard 1/8 DIN plastic case and are designed for a wide variety of temperature, DC input and strain-gauge measurements.
Doric 500T Series Digital Indicators
The Doric 500T Digital Indicators are designed for a variety of temperature measuring applications. Excellent accuracy and small size combine to make it the ideal choice for most industrial temperature indications.
The Doric 500T Digital Indicators features a unique 0.1° or 1° automatic resolution. For temperature measurements below 1000°F, the instrument displays to a 0.1° resolution. With a measurement more than 1000°F, the instrument automatically switches to a 1°
resolution. Thermocouple types R, S, and B only display in 1° increments. For any
applications where a 1° resolution is desired for everything, the unit can be set to
display only 1° increments throughout its measuring range.
For ease of installation, each instrument is supplied in a standard 1/8" DIN 1.9" x
3.8" (4.8cm x 9.6cm) plastic case and has rear-accessible universal screw
terminals. Large LEDs make temperature readings easy to read. Power is derived
from 115 or 230VAC. Power is selectable via an internal slide switch.
Select among nine temperature sensors of thermocouple types, J, K, T, E, R, S,
and B or 100 ohm; 3-wire, Platinum RTDs, either .00385 or .00392 alpha. Each of
these nine are selected via a miniature rotary switch located directly behind the
snap-off front lens. No calibration is required to switch between thermocouple
types. Another miniature DIP switch, also behind the lens, selects between F or C
display.
 Doric 500 Series digital Indicators
Doric 500D Digital Indicators
Featuring total user flexibility for input and display, the Doric 500D Digital Indicators may be the last DC input indicators you'll ever have to specify. The scaling flexibility with 4-digit resolution, high accuracy, small size and low cost make the Doric 500D Digital Indicators the best value DC input indicator.
Doric 500D Digital Indicators flexibility is unique. You can select between milliamp or voltage input with a switch easily accessible behind the snap-off front lens. Full scales are 0-20mA or 0-10V. These or any subset (e.g., 4-20mA, 1-5V, 200mV-2.5V, etc.) can be scaled.
Scaling and calibrating the Doric 500D Digital Indicators to display engineering units from the DC input has never been easier. Two simple push buttons conveniently located behind the snap-off lens are used to set zero (Lo), full scale (Hi) and a decimal point. The Doric 500D Digital Indicators can be scaled within its wide -999 to 9999 display count. The microprocessor-based design of the Doric 500D Digital Indicators provides superior measurement stability, 1-digit repeatability, and 0.02% accuracy. For ease of installation, each instrument is supplied in a standard 1/8" DIN 1.9" X 3.8" (48mm X 96mm) plastic case and has rear-accessible universal screw terminals. Large LEDs make
process readings easy to read, even from a distance. Power is derived from 115 or
230VAC and is selectable via an internal slide switch.
Whether your application is for straight DC measurement or process measurements from DC transducers, transmitters, signal conditioners, or other instrumentation, the Doric 500D Digital Indicators is the answer.
Doric 500 Series digital Indicators
Doric 500G Digital Indicators
The Doric 500G Digital Indicators feature total user flexibility for strain-gage input, range, and display. It is compatible with both bonded-foil type (2mV/V, 3mV/V, 4mV/V) transducers and higher output, semiconductor (10mV/V, 20mV/V, 30mV/V) type strain-gages. Combining this input flexibility with user scaling, 4-digit display, small size, and low cost makes the Doric 500G Digital Indicators the best value strain-gage and load cell indicator available.
Doric 500G Digital Indicators bright, LED display provides excellent operator readability. Its microprocessor design and ratiometric measuring circuit assure high accuracy
with superior repeatability.
Doric 500G Digital Indicators includes a built-in, 10VDC excitation supply to power the strain-gage transducer to save you separate sourcing costs.
Scaling and calibrating the Doric 500G Digital Indicators to display engineering units from the strain-gage input have never been easier. Two simple push buttons conveniently located behind the snap-off lens are used to set zero (Lo), full-scale (Hi), and a decimal point. Because the Doric 500G Digital Indicators scaling is digitally set, there are no pots to drift nor complicated formulas to compute to set DIP switch gain-ranges. It can achieve sensitivities as low as 1µV per count and can be scaled anywhere within its wide -999 to 9999 display count. For ease of installation, each instrument is supplied in a standard 1/8 DIN 1.9" x 3.8" (48mm x 96mm) plastic case and has rear-accessible universal screw terminals. Large LEDs make process readings easy to see and read, even from a distance. Power is derived from 115 or 230VAC and is selectable via an internal slide switch.
Whether your strain-gage application calls for measuring pressure, weight, torque,
tension, or thrust, the Doric 500G Digital Indicators is the answer.
Doric 500 Series digital Indicators
|
