The Endevco Model 2793 16-channel signal conditioner
is an economical power supply/buffer amplifier for ISOTRON
accelerometers or other piezoelectric voltage mode transducers.
It can also power Remote Charge Convertors (RCC) in a
high impedance piezoelectric measurement system. Each
channel provides a constant current excitation (4 mA or
10 mA) for the transducer or the RCC, and all outputs
are buffered for driving long cables. Amplifier gain of
1 or 10 is set by an internal jumper. Individual LED status
indicator informs the user of short, open or normal conditions.
Features:
• 16-channel constant current supply/amplifier for ISOTRON®/ICP
compatible accelerometers or remote charge convertors
• "D" output connector for simple connection to D/A board
• Wide frequency range: 1 Hz to 30 kHz, LED status indicators
• Low per channel cost
The Endevco Model 2793 16-channel signal conditioner
is an economical power supply/buffer amplifier for ISOTRON
accelerometers or other piezoelectric voltage mode transducers.
It can also power Remote Charge Convertors (RCC) in a
high impedance piezoelectric measurement system. Each
channel provides a constant current excitation (4 mA or
10 mA) for the transducer or the RCC, and all outputs
are buffered for driving long cables. Amplifier gain of
1 or 10 is set by an internal jumper. Individual LED status
indicator informs the user of short, open or normal conditions.
