- Frigid-X™ adjustable spot
cooling systems are low cost and maintenance free spot cold
guns which utilize a vortex
tube to produce cold air at one end.
- Frigid-X™ adjustable spot
cooling systems temperature can be adjusted using a knob at
the hot end to set the temperature precisely to your requirements.
- Frigid-X™ adjustable spot
cooling systems temperatures range from approximately minus
30ºF to room temperature and can be easily set with a thermometer.
- Frigid-X™ adjustable spot
cooling systems come with three brass generators for flow rate
adjustment - 15 SCFM, 25 SCFM and 30 SCFM providing refrigeration
up to 2100 BTU/hr.
|
Sub-zero
cold air temperatures from an ordinary compressed air supply
for air gun style spot air cooler applications where adjustability
is important!
|
Cold air is directed
using the flexible tubing. A magnetic base is standard for portability
and easy mounting of the Frigid-X™ adjustable spot cooling
system.
Units are available with either a single point hose kit for small
surface area spot cooling or a dual point hose kit when heat is
generated over a larger surface area.
Cold
gun tool cooling system produces a wide range of airflow and
temperature as by adjusting the knob at the hot end and changing
the various generators supplied.
The generators control the
air consumption and are easily interchangeable.
The Frigid-X™ adjustable
spot cooling systems have a 25 SCFM generator installed that will
produce up to 1,800 Btu/hr. of cooling. If less is required, the
15 SCFM generator can deliver 1,100 Btu/hr.
If more cooling is needed Nex Flow™ Technologies can supply
you with the 30 SCFM generator for up to 2,100 Btu/hr. of cooling.
Features
- No moving parts or electricity
- Compact and lightweight
- Low cost
- Maintenance free
- Instant cold air
- Quiet
- Magnetic base
- Interchangeable generators
Applications
-
-
-
Cool plastic
machined parts
-
-
Cool welding
horns on ultrasonics
-
-
Cool Electronic
components
-
Operation
Frigid-X™ adjustable
spot cooler systems create
cold air from a vortex tube.
Using an adjustable knob at the muffled "hot end", waste
hot air exits the tube and controls the temperature drop at the
"cold end".
Air exits the cold end and is directed using adjustable flexible
tubing to the point of use. The unit is portable using a magnetic
base.
|
Products
