Frigid-X™
Tool Cooling System
- For dry machining applications
- replaces polluting and often toxic mist systems to improve
dry machining operations. No mess, no residue and low in cost.
- Is efficient and can improve
dry machining operations and assist in pot cooling applications
for a variety of industrial machining processes but increasing
matchining rates and extending tool life.
- Produces cold air at approximately
75 degrees below supply air temperature. The unit is muffled
for quiet operation. No moving parts assures long life, maintenance
free operation while extending tool life and improving production
rates.
- Can often replace costly mist
coolants and certainly improves the quality and output of
all types of dry machining operations form metals to plastics.
Unit is low cost, no electricity with no moving parts and
is essentially maintenance free.
Frigid-X™
Tool Cooling System Operation
Frigid-X™ Tool Cooling
System uses a vortex
tube to produce cold air at one end. Hot air is exhausted
as waste at the muffled hot end.
The cold air is also muffled and exists through the flexible
hose, which is used to direct the air to where cooling is required.
A magnetic base allows for portability and easy mount of the
unit to the machine.
Frigid-X™
Tool Cooling System Use
Always use clean, dry compressed air. A manual
filter is supplied with
every system to insure dry air. If oil is a major problem in
the compressed air line, an oil removal filter is also recommended.
The temperature of the air can be controlled by reducing the
pressure using either a regulator or manual shut-off valve.
A solenoid valve may also be connected into the machine operation
to turn the air supply to the cooling unit on-off as it is needed,
thereby conserving compressed air usage.
Selecting The
Right Frigid-X™ Tool Cooling System Model
Frigid-X™ Tool Cooling Systems are available with either a single
point or dual point hose kit. The single point system is used
for most drilling and grinding operations where point cooling
is required. Milling, band sawing or other operations where
the heat is generated over a larger surface area, require a
dual point outlet to cover the larger area. To convert a single
point system to a dual point simply purchase the dual point
hose kit.
Frigid-X™
Tool Cooling System Applications
Replaces polluting and often toxic mist systems to improve dry
machining operations.
No mess, no residue and low in cost.
Frigid-X™
Tool Cooling System Dimensions
Products use filtered
compressed air and vortex tube technology to produce sub-zero
air for industrial spot cooling. Cold air machining eliminates
mist coolants and heat-related parts growth while improving
tool life, parts tolerance and surface finish quality.
