Amiad Filtration ABF-L Automatic Filters

ABF Series | EBS Series | MEGA EBS Series | SAF Series | TAF Series | Plastic Filters | Steel Filters
Automatic Filters for flow rates up to 700 m³/h, 3100 USgpm per unit

Amiad,Filtration,ABF-L,Automatic,Filters

The ABF filters are suitable for high dirt load filtration requirements and heavy duty conditions.
The cleaning mechanism consists of 3 stainless steel brushes revolving inside the screen cylinder.

 


Features

  • Reduce maintenance costs on down stream equipment
  • Wide range of filtration degrees: from 3500 to 200 micron
  • Simple cleaning method: stainless steel brushes
  • Large filter area: 6000 cm3
  • Corrosive resistant: phosphate pre-treated, polyester steel housing. Also available on request, sea water coating or stainless steel housing
  • No interruption of flow during flushing
  • Minimal water waste: less than 1% of the total flow
  • Suitable for high load filtration requirements and heavy duty conditions
  • Applications: water supply systems, cooling water, process water, waste water
  • In: steel industries, pulp and paper, chemical industries, plastic industries, mining, irrigation etc.

Typical Applications:

  • Cooling water in high buildings and  industry.
  • Polishing effluent water in paper mills.
  • Filtration for drip irrigation.
  • Municipal drinking water supply.
  • Supply water for various industries.
  • Elimination of Zebra mussels.
  • Golf courses irrigation.
  • Pre filtration for ultra filtration and reverse osmosis.
  • Sea water filtration
 

 

Technical specifications

General

Maximum flow rate  700 m³/h 3100 USgpm  
Minimum working pressure

1 bar

15 psi

Consult manufacturer for optimum flow
Maximum working pressure 10 bar 150 psi 16 bar (240 psi) upon request
Filter area 6,000 cm² 930 in²  
Inlet/ outlet diameter 200,250,300,
350 mm
8",10"
12",14"
 
Filter housing diameter 400 mm 16"  
Maximum working temperature 70°C 185°F  
Filter screen 200-3500 micron St.St.316L
Type of screen 800-3500 micron perforated screen
200- 800 micron wedgewire screen
Weight 200mm = 213kg 8" = 470 lb.  
250mm = 228kg 10" = 503 lb.
300mm = 237kg 12" = 523 lb.
350mm = 260kg 14" = 573 lb.

Flushing Data

Exhaust valve 50mm 2" or 80 mm (3") when pressure lower than 2.5 bar
Flushing cycle time 15 sec. 15 sec. 40 sec.
Wasted water per cycle 200 litre 15 gallon 280 litre
minimum flow for flushing 50 m³/h 220 USgpm 25 m³/h

Control & Electricity (electronically controlled types)

Electric motor 1/2 HP / 14 Output R.P.M
Rated operation voltage 3 phase, 380V 50 HZ, or 220/440V 60HZ
Upon request 24V DC / 12 VDC
Control voltage 24V AC ( 24V DC upon request)

Construction Materials

Filter housing and lid Carbon steel 37-2.
(Stainless steel 316 available on request)
Screen Stainless steel 316
Cleaning mechanism Stainless steel 316, PVC and Delarin
Exhaust valve Epoxy coated cast iron
Seals Nitril rubber, Natural rubber, Teflon
Control system Brass, Stainless steel, engineering plastic, Polyethylene

Standard Filtration Degrees

  perforated screen
micron 3500 2500 1500 800
mm 3.5 2.5 1.5 0.8
mesh 4 6 10 20
  Wedgewire Screen
micron 800 500 300 200
mm 0.8 0.5 0.3 0.2
mesh 20 30 50 80


FILTER
INNOVATIONS
INC.
744 Gordon Baker Rd
Toronto ON M2H 3B4
Tel: 416 490-7848
Fax: 416 490-0974

Amiad Filtration ABF-L Automatic Filters