Pharmaceutical
Sifter
Pharmaceutical
Sifter
Clean-in-place spray heads sanitize quickly and throughly,
hands-free
 A
new sanitary VIBROSCREEN vibratory separator for pharmaceutical
applications features clean-in-place spray heads for hands-free
wash down. The screener is configured with two screening decks
of identical mesh to ensure failsafe separations in the event
of a screen failure. Three clean-in-place spray heads are required;
one each for the upper, central and lower chambers. Quick-disconnect
clamps allow two-minute disassembly of all water supply hoses,
clean-in-place spray head fittings, and separator body sections
for inspection or screen changes. Unlike traditional circular
screen separators, the pharmaceutical sifter had no gaps between
the mounted screen and the frame wall. It is offered in diameters
from 18 to 100" (460 to 2540mm) in all-stainless construction
finished to FDA as well as 3-A, BISSC and other sanitary standards.
Accessories available include ultrasonic and mechanical anti-blinding
devices, and automatic long-term lubrication systems for gyratory
motor bearings. The screener is equipped with one imbalanced-weight
gyratory motor positioned beneath the screening chamber. The motor
imparts multi-plane inertial vibration to the spring-mounted screening
decks, causing oversize particles to vibrate across the screen
surface in controlled pathways to the screen periphery where they
are discharged. Undersized particles pass rapidly through the
screen and are discharged through a spout at the periphery of
the bottom collection chamber. |
|
