|
Mighty
Mini
The ideal
solution to unwanted oil in coolants and parts washers therefore extending
the life of cooling and wash water! The Abanaki Mighty Mini and Duro
Mini (stainless steel housing) can remove 1 to 2 gallons of
medium weight oil per hour (depending on belt selection). The Mighty
Mini is designed to minimize water content in the disposed oil; however
the optional Oil Concentrator® will further reduce the water content
in the oil to less than 2%. This is a tremendous cost saving if the
oil is to be recycled or disposed.
It is compact making efficient use of available space... it fits underneath
most CNC machines as well as inside parts washers. The small footprint
even allows the Mighty Mini to fit through the bung hole of a 55 gallon
drum! With belts specifically selected for your application available
in lengths of 6, 12, 18 and 24", this skimmer has endless application
possibilities.
The Mighty Mini weighs in at only 8 pounds and the ease of installation
make this skimmer the most versatile of our line. Use it here today
and there tomorrow as it installs in just seconds.
- Smallest and lightest Abanaki skimmer
- weighs about six pounds
- Easily hand carried to the source
of the problem - can fit almost anywhere
- Oil removal rates up to 2.0 gph
- Designed for tank depths from 6"
to 24" (15.2 cm to 61.0 cm)
- Belt and tail pulley can fit through
a 2" (5.1 cm) diameter bung hole
- Great for automotive and mobile equipment
service shops
- Very affordable
- Ask about OEM options
Back
To Top
|
|
Duro
Mini
The ideal
solution to unwanted oil in coolants and parts washers therefore extending
the life of cooling and wash water! The Abanaki Mighty Mini and Duro
Mini can remove 1 to 2 gallons of medium weight oil per hour (depending
on belt selection). Both the Mighty Mini and Duro Mini are designed
to minimize water content in the disposed oil; however the optional
Oil Concentrator® utilized with the Mighty Mini will further reduce
water content in the oil to less than 2%. This is a tremendous cost
saving if the oil is to be recycled or disposed.
They are compact making efficient use of available space... it fits
underneath most CNC machines as well as inside parts washers. The small
footprint even allows either unit to fit through the bung hole of a
55 gallon drum! With belts of corrosion-resistant stainless steel or
specially engineered polymer available in lengths of 6, 12, 18 and 24",
this skimmer has endless application possibilities.
Both units weighs in at less than 8 pounds and the ease of installation
make these skimmers the most versatile of our line. Use it here today
and there tomorrow as it installs in just seconds.
- Fan cooled motor
- Belts available 1" and 2"
wide; materials: specially engineered polymer, corrosion resistant
steel or elastomer
- 304 stainless housing
- Spring loaded stabilizer bar
- 3-foot clear discharge hose and clamp
- 8-foot grounded power cord w/plug
- Ask about OEM pricing
Back
To Top
|
|
The
Portable Tote-It
The Tote-It
utilizes a continuous belt and wiper to remove up to 12 gallons of oil
per hour from the fluid surface. The belt operates on a motor and pulley
system attached to a stabilizer bar that is immersed in the contaminated
liquid. After traveling over the head pulley, the belt passes through
tandem wiper blades where oil is scraped off both sides of the belt,
and discharged through a 1-1/4 in. ID hose. The tail pulley has flanges
which allow it to roll freely on the inside of the belt without becoming
dislodged. It does not need to be fastened to the tank.
The Tote-It utilizes a continuous belt and wiper to remove up to 12
gallons of oil per hour from the fluid surface. The belt operates on
a motor and pulley system attached to a stabilizer bar that is immersed
in the contaminated liquid. After traveling over the head pulley, the
belt passes through tandem wiper blades where oil is scraped off both
sides of the belt, and discharged through a 1-1/4 in. ID hose. The tail
pulley has flanges which allow it to roll freely on the inside of the
belt without becoming dislodged. It does not need to be fastened to
the tank.
Oil skimming makes use of the differences in specific gravity and surface
tension between oil and water. These physical characteristics allow
the belt to attract oil and other hydrocarbon liquids from the surface
of the fluid.
The Tote-It is especially well suited for parts washing and machining
center applications. By removing surface oil from a wash tank, the parts
will not be recontaminated as they are withdrawn. Removing tramp oil
from a coolant tank prevents excessive smoke and fumes due to oil burning
during cutting operations. It also reduces bacteria growth in the tank,
along with the resulting odor.
- Lightweight for portability; approximately
36 pounds
- Can be installed permanently in limited
access areas
- Oil removal rates up to 12 gph (45
lph)
- Standard length is 5' center to center
(10' maximum)
- For medium duty applications; parts
washers, tanks, etc.
Back
To Top
|
|
Oil
Grabber Model 4
The Abanaki
Model 4 Oil Grabber is a dependable and effective means of removing
oil from water and water-base solutions. Often, skimming by itself will
reduce oil to an acceptable level of water purity. Depending on the
characteristics of the liquid, it is possible for the Model 4 alone
to reduce oil content to less than five parts per million in water.
The unit can be used as a pretreatment before filtration, and in conjunction
with coalescing systems.
The Model 4 utilizes a continuous belt and wiper to remove up to 20
gallons of oil per hour from the fluid surface. The belt, operating
on a motor and pulley system, runs through contaminated liquid to pick
up oil from the surface. After traveling over the head pulley, the belt
passes through tandem wiper blades where oil is scraped off both sides
of the belt and discharged. The tail pulley has flanges which allow
it to roll freely on the inside of the belt without becoming dislodged.
It requires no bearings and does not need to be fastened to the tank.
If turbulent conditions exist, an optional tether and cage assembly
prevents the tail pulley from being dislodged.
Oil skimming makes use of the differences in specific gravity and surface
tension between oil and water. These physical characteristics allow
the belt to attract oil and other hydrocarbon liquids from the surface
of the fluid. The Model 4 can be used in tanks with depths as shallow
as one foot, or as deep as 100 feet.
- A single unit elevates and separates
oil at a rate up to 20 gph
- Lifts oil up to 100' without the need
of expensive pumps
- Maintains skimming efficiency with
fluctuating fluid level
- Can be used in depths as shallow as
one foot
- Requires no tank modifications in
most applications
- Operates in turbulent liquid using
optional tail pulley cage and tether assembly
- Easy mounting and fast cleaning, with
minimal maintenance
Back
To Top
|
|
Oil
Grabber Model 8
The Abanaki
Model 8 Oil Grabber is a dependable and effective means of removing
oil from water and water-base solutions. Often, skimming by itself will
reduce oil to an acceptable level of water purity. Depending on the
characteristics of the liquid, it is possible for the Model 8 alone
to reduce oil content to less than five parts per million in water.
The unit can be used as a pretreatment before filtration, and in conjunction
with coalescing systems.
The Model 8 utilizes a continuous belt and wiper to remove up to 40
gallons of oil per hour from the fluid surface. The belt, operating
on a motor and pulley system, runs through contaminated liquid to pick
up oil from the surface. After traveling over the head pulley, the belt
passes through tandem wiper blades where oil is scraped off both sides
of the belt and discharged. The tail pulley has flanges which allow
it to roll freely on the inside of the belt without becoming dislodged.
It requires no bearings and does not need to be fastened to the tank.
If turbulent conditions exist, an optional tether and cage assembly
prevents the tail pulley from being dislodged.
Oil skimming makes use of the differences in specific gravity and surface
tension between oil and water. These physical characteristics allow
the belt to attract oil and other hydrocarbon liquids from the surface
of the fluid. The Model 8 can be used in tanks with depths as shallow
as one foot, or as deep as 100 feet.
- Similar to the Model 4 with additional
features
- A single unit elevates and separates
oil at a rate up to 40 gph
- Can be used with a full range of Abanaki
options (heater, debris rakes,
belt and tail pulley tethers, etc.)
- Saves coolant and conserves wash water
- Flagship unit of Abanaki's product
line
Back
To Top
|
