 The
ideal solution to unwanted oil in coolants and parts washers therefore
extending the life of cooling and wash water! The Abanaki Mighty
Mini SST can remove 1 to 2 gallons of medium weight
oil per hour (depending on belt
selection). Its stainless steel construction enables it
to operate in harsh chemicals and heat while its integrated timer
lets it run only when needed. The Mighty Mini SST
is designed to minimize water content in the disposed oil; however
the optional Oil
Concentrator® will further
reduce the water content in the oil to less than 2%. This is a tremendous
cost saving if the oil is to be recycled or disposed.
It is compact making
efficient use of available space... it fits underneath most CNC
machines as well as inside parts washers. The small footprint even
allows the Mighty Mini SST to fit through the bung
hole of a 55 gallon drum! With belts specifically selected for your
application available in lengths of 6, 12, 18 and 24" (see
Belt Selection
page), this skimmer has endless application possibilities.
The Mighty
Mini SST weighs in at only 8 pounds and the ease of installation
make this skimmer the most versatile of our line. Use it here today
and there tomorrow as it installs in just seconds.
Features
-
-
-
Belts available
1" and 2" wide; materials specifically selected
for your application (see Belt
Selection page)
-
Both sides of
belt are wiped for better efficiency
-
Chip resistant,
baked on, powder-coated base and housing
-
Spring loaded
stabilizer bar
-
3-foot clear
discharge hose and clamp
-
8-foot grounded
power cord w/plug
-
Stainless steel
construction
Advantages
-
Smallest and
lightest of the Abanaki skimmer line
-
Easily hand
carried to the source of the problem
-
Removes oil
at rates up to 2 gallons per hour
-
Designed for
tank depths from 6" to 24"
-
Belt and tail
pulley can fit through a 2" diameter bung hole
-
Great for automotive
and mobile equipment service shops
-
VERY affordable
even for small businesses
Specifications
| Oil
Removal Rate: |
Model MM 100ST-06: 1 gph (3.8
lph) with 1 in. (25.4 mm) wide belt, 6 in. (153 mm) length
Model MM 100ST-12: 1 gph (3.8 lph) with 1 in. (25.4 mm) wide
belt, 12 in. (305 mm) length
Model MM 100ST-18: 1 gph (3.8 lph) with 1 in. (25.4 mm) wide
belt, 18 in. (458 mm) length
Model MM 100ST-24: 1 gph (3.8 lph) with 1 in. (25.4 mm) wide
belt, 24 in. (610 mm) length
Model MM 200ST-06: 2 gph (5.7 lph) with 2 in. (50.8 mm) wide
belt, 6 in. (153 mm) length
Model MM 200ST-12: 2 gph (5.7 lph) with 2 in. (50.8 mm) wide
belt, 12 in. (305 mm) length
Model MM 200ST-18: 2 gph (5.7 lph) with 2 in. (50.8 mm) wide
belt, 18 in. (458 mm) length
Model MM 200ST-24: 2 gph (5.7 lph) with 2 in. (50.8 mm) wide
belt, 24 in. (610 mm) length |
| Motor: |
Fractional hp TEFC, 115 or
220 VAC, single phase, 60 Hz gear
motor, including 8 foot cord with electrical plug
Optional: 50 Hz motor is available |
| Belt
Material: |
Specifically selected for
your application
(see Belt Selection
page) |
| Wiper
Material: |
Consult factory for the material
appropriate for your application. |
| Mounting
Method: |
Flat base mount with oil discharge
through a 3/4 in. ID hose |
| Specification
Notes: |
- The Mighty Mini SST is
UPS shippable.
- Consult factory for recommendations
covering operating conditions not listed here.
|
|
