The
Abanaki Model 4 Oil Grabber is a dependable and effective means
of removing oil from water and water-base solutions. Often, skimming
by itself will reduce oil to an acceptable level of water purity.
Depending on the characteristics of the liquid, it is possible
for the Model 4 alone to reduce oil content to less than five
parts per million in water. The unit can be used as a pretreatment
before filtration, and in conjunction with coalescing systems.
The Model 4 utilizes a continuous
belt and wiper to remove up to 20 gallons of oil per hour from
the fluid surface. The belt, operating on a motor and pulley system,
runs through contaminated liquid to pick up oil from the surface.
After traveling over the head pulley, the belt passes through
tandem wiper blades where oil is scraped off both sides of the
belt and discharged. The tail pulley has flanges which allow it
to roll freely on the inside of the belt without becoming dislodged.
It requires no bearings and does not need to be fastened to the
tank. If turbulent conditions exist, an optional tether and cage
assembly prevents the tail pulley from being dislodged.
Oil skimming makes use of the differences
in specific gravity and surface tension between oil and water.
These physical characteristics allow the belt to attract oil and
other hydrocarbon liquids from the surface of the fluid. The Model
4 can be used in tanks with depths as shallow as one foot, or
as deep as 100 feet.
Advantages
- A single unit elevates and separates
oil
- Lifts oil any distance without
the need of expensive pumps
- Maintains skimming efficiency
with fluctuating fluid levels
- Can be used in depths as shallow
as one foot, or as deep as 100 feet
- Requires no tank modifications
in most applications
- Operates in turbulent liquid
using optional tail pulley cage and tether assembly
- Easy mounting and fast cleaning,
with minimal maintenance
Rugged Construction for Harsh
Conditions: The Model 4 is designed to last for many years.
With the proper configuration it can handle liquid temperatures
up to 212°F, and the pH of the fluid can range from 1 to 13. Belts
are specifically selected for your application (see Belt Selection page).
The skimmer drive includes an oil filled gear reducer with bronze
gears and ball bearings. The motor, reducer, and powder coated
finish of the weldments give the Model 4 exceptionally long life,
even under the harshest conditions.
Typical
Applications
The Model 4 is designed for those
applications where other models provide excess capacity, or physically
will not fit. From a mere shimmer on top of water to a heavy oil
slick, the Model 4 performs efficiently, removing up to 20 gallons
of oil per hour. Wastewater sumps
- Parts washers
- Coolant systems
- Heat treating fluids
- Food processing plants
- Parking lots, garages, and service
facilities
- Outdoor ponds, lakes, and basins
- Underground tanks
- Ships' bilges
- Aircraft service areas and tarmac
runoff
- Truck, locomotive, and other
mobile equipment washing facilities
Features
- Requires only a small area in
the tank or sump
- Easy mounting
- High temperature capability
- Chip resistant powder finish
- Hazardous duty and food grade
options
- Custom designs and turnkey systems
available
- Fast cleaning with minimal maintenance
Product
Photos
|
Model 4 in action, check out the dual
wiper blade action!
|
|
Model 4 in a parts washer application
|
A Model 4 in its favorite
environment - an oil pit. |
Specifications
| Oil
Removal Rate: |
16 gph (60 lph) with standard
tail pulley.
20 gph (75 lph) with high capacity tail pulley.
(Removal rate is based on 30 weight oil in water.) |
| Tail
Pulley: |
Specify standard or high capacity.
(The high capacity option uses a patented pulley design
that improves the adherence of oil to the inside
of the belt, thus increasing the removal rate.) |
| Motor: |
Fractional hp, TEFC, gear
motor operating on either
115/230VAC, single phase, 60Hz or 230/460 VAC,
three phase, 60Hz.
Optional: 50Hz power source; explosion proof; drip proof;
pneumatic; and wash down duty motors. |
| Belt
Width: |
4 in. (10 cm). |
| Belt
Length: |
User specified (up to 100',
measured from the center of head pulley to center of tail
pulley) |
| Belt
Material: |
Specifically selected for
your application
(see Belt Selection
page) |
| Wiper: |
Nitrile standard; CRV optional.
Specify wiper material
based on temperature and fluid compatibility.
(See "Operating Limits.") |
| Mounting
Method: |
Standard: Bracket for customer-supplied
steel channel,
with oil discharge through the channel.
Option: Flat surface mount with oil discharge through a
1-1/2 in (3.75 cm)
NPT male pipe fitting. |
| Weights
1: |
Drive assembly and housing
with motor, without belt or
tail pulley: 71 lbs. (32 kg) max.
Standard or high capacity tail pulley: 8 lbs. (3.6 kg)
4 ft. corrosion-resistant steel belt: 4 lbs.(1.8 kg)
(belt weight varies according to actual length specified) |
| Options
(Specify): |
- Flat surface mount kit
- Tail pulley cage and tether
assembly for operation in turbulent liquids.
- 3" PVC discharge
pipe kit
- Floor mounted support
stand.
- 316 stainless steel housing.
- Oil Concentrator™
for virtually water-free oil (see Abanaki Oil Concentrator
on next page.)
- Float switch with signal
light ( fits in 3/4" drum bung) to prevent discharge
drum overflow.
- Poly-shelters, reinforced
for durable protection in outside applications
- Timer and electrical controls
|
Operating
Limits
Wipers
| Temperature of Liquid |
pH 1-5 (acidic) |
pH 6-8 (neutral) |
pH 9-14 (alkaline) |
33°F-180°F
(0.5°C - 82°C) |
CRV |
nitrile |
CRV |
181°F-212°F
(83°C-100°C) |
CRV |
CRV |
CRV |
Belts
| Temperature of Liquid |
pH 1-5 (acidic) |
pH 6-8 (neutral) |
pH 9-14 (alkaline) |
33°F-180°F
(0.5°C - 82°C) |
CR steel, polymer
|
carbon steel,
polymer |
polymer |
181°F-212°F
(83°C-100°C) |
CR steel |
carbon steel,
CR steel |
CR steel |
Standard Configuration
The standard Model 4 is supplied
with a motor belt guard, spring-loaded adjustable wiper blade
assembly, skimmer belt, tail pulley, and assembly instructions.
Specification Notes:
- The Model 4 is UPS shippable.
- Consult factory for recommendations
covering operating conditions not listed here.
