|
AMT PUMPS, IPT PUMPS, GR PUMPS - Submersible And Sump Pumps - Industrial Submersible Pumps - IPT Submersible Pumps - Drainage/Utility Submersible Pumps - Shredder Sewage Submersible Pumps - Contractor Submersible Pumps - with many options. Available in Cast Iron, Aluminum and many different seal options. Also available with Honda Engines, Briggs and Stratton Engines, and Yanmar Diesel Engines.
|
 Industrial Sump Pumps
 The AMT line of Industrial/Commercial Sump pumps is designed for heavy duty commercial applications, as well as residential use where a combination of durability and high performance is required. AMT Sump pumps are available in stainless steel, bronze and cast iron constructions with TEFC motors in 1/3 through 3/4 HP for proper pump selection in most applications. All models include stainless steel shaft, screen and float. All motors are fitted with automatic switch and an 8 foot 16/3 115 VAC line cord. Pumps require minimum sump pit of 14" diameter and 24" depth.
Industrial Sump Pumps
|
|
 IPT Submersible Pumps
 Slim-design, light weight CSA listed submersibles feature top discharge as well as cast-iron impellers, 304 stainless steel casing, motor housing, shaft and hardware. Pump motor is thermal overload protected. An optional piggyback mercury-free float switch is available. Float Switches: The mercury free liquid level control has a piggyback plug molded to the cord allowing the pump motor to plug into the cord and then plug the entire assembly into a standard grounded outlet.
1-1/4" Laundry Tray Pump
|
|
 Submersible Pumps
AMT Industrial Submersible pumps are lightweight, portable, reliable and energy efficient. The clog resistant impeller is designed for general dewatering pump use of which applications include: sump pumps, basements, construction drainage, dewatering, waste water treatments, agricultural irrigation, flooding and other applications requiring clear/drainage water removal. Motors are rated continuous duty 115VAC @ 60 Hz with standard cord/plug and have automatic thermal overload protection.
Submersible Pumps
|
|
 Drainage/Utility Submersible Pumps
AMT Submersible Sump pumps are designed for many applications including sump pits, drainage pits, overflow tanks, basements, dewatering, excavation, grain elevators, construction drainage, cooling towers and other applications requiring clear water removal. AMT Submersible pumps include suction screen and automatic float switch (except stainless steel model 5780-98).
Drainage/Utility Submersible Pumps
|
|
 12 Volt DC Submersible Pumps
The AMT Submersible 12 Volt DC pump is designed for use in dewatering applications where limited or no electricity is present and for emergency back-up during power failure. The pump weighs 33 pounds and is constructed of aluminum with cast iron impeller. Unit comes assembled with 30 foot power cord, which has battery clips for easy attachment to 12 volt battery.
12 Volt DC Submersible Pumps
|
|
 Shredder Sewage Submersible Pumps
AMT Submersible Shredder Sewage pumps feature an enhanced spiral shredder mechanism plate and carbide tipped impeller to prevent clogging and reduce maintenance when cutting through stringy, fibrous and sludge type waste. Applications include: sewage pumping stations, septic tanks, sewage treatment plants, dirty water drainage, flood and emergency. Motors are rated continuous duty and single phase models have thermal overload protection. Minimum liquid requirements must be above 85%. Failure to do so may cause pump damage and void warranty.
Shredder Sewage Submersible Pumps
|
|
 Contractor Submersible Pumps
AMT Submersible Contractor pumps are intended for use in residential, commercial and industrial settings. Applications include: construction sites, waste water, storm water, farming, irrigation, excavation, mining, marine, basement and other general drainage applications involving sediment laden liquids with solids up to 3/8" in diameter.
Self-cleaning impeller featuring abrasionresistant high chromium steel construction for durability. Pumps have a 3450 RPM electric motor fitted with an unfinished power cord that requires field wiring (no controls are supplied). Motors are rated continuous duty and single phase models have thermal overload protection.
Contractor Submersible Pumps
|
|
 50 Hz Submersible Pumps
AMT Industrial Submersible pumps are lightweight, portable, reliable and energy efficient. The clog resistant impeller is designed for general dewatering pump use of which applications include: sump pumps, basements, construction drainage, dewatering, waste water treatments, agricultural irrigation, flooding and other applications requiring clear/drainage water removal. Motors are rated continuous duty 110VAC @ 50 Hz with standard cord and have automatic thermal overload protection.
-
Available in 2", 3", and 4" Options
-
BST Threaded Connections
-
110, 220, 400 VAC Options
-
Up to 280 GPM
50 Hz Submersible Pumps
|
|
