AnsiPro AP96 SP Series Self Priming Chemical Process Pump

• CAPACITIES TO 1500 GPM (340M3/H)

• Heads to 375 feet (114 M.)

• Temperatures to 500°F (260°C)

• Suction lifts to 25 feet (7.6 M.)

AnsiPro AP96 SP Series Applications

• Chemical transfer

• Tank car unloading

• Coal pile drainage

• Industrial Sump

• Mine dewatering

• Petroleum transfer
  

• Bilge water removal
  

• Filter systems
  

• Aircraft fueling

Reliable Self Priming Operation

Priming and air separation accomplished within casing. Twin volute casing design exhausts suction with only an initial priming charge of liquid in casing. During priming cycle the lower volute functions as an intake while the upper volute discharges liquid and entrained air into
separation chamber. Air is separated and expelled through pump discharge while liquid recirculates into lower volute. Once air is completely exhausted from suction and liquid fills impeller eye, pump is primed and functions as a conventional centrifugal pump with both
volutes acting as discharges. Casing is designed so that an adequate volume of liquid for repriming is always retained in pump even if liquid is allowed to drain back to source of supply from discharge and suction.

Size Comparison Chart

Interchangeability

All components such as; power end, stuffing box and impeller are fully interchangeable between corresponding sizes of AP96 and AP96/SP.

AnsiPro AP96 Series Pump Brochure

AnsiPro Pump Company | AnsiPro 96 | AnsiPro 96 LF Series | AnsiPro 96 SP Series