Flux Renner Pumps
Magnetically Coupled Centrifugal Pumps | Renner RM 1 Pump | Flux Renner Pumps
|
Constructional design Housing, impeller, impeller magnet coating and rear casing are made of either glass-fibre reinforced PP plastic or PVDF or stainless steel. Sleeve bearings, starting ring and centering shaft are made of 99.7% pure oxide ceramic. O-ring sealing of the housing is made of FPM or EPDM or FEP (optionally available).
The pump is available in:
Motor:
Weight:
Fluid temperature range:
Pressure range: **
Position of terminal box:
Position of discharge port:
Ports acc. to German DIN 8063 standard:
Accessories (optional):
* To deliver liquids with a higher relative density, we also offer all our pumps with smaller impeller diameters which, however, reduce delivery rates and heads of the pumps. If in doubt, please consult us. ** Maximum system pressure depends on the temperature of the fluid delivered. << Back to Renner Magnetic Drive Pumps >>
|
Magnetically coupled centrifugal pumps of building group 1 are non-self-priming centrifugal pumps with volute casing. They operate in horizontal position and are built in monobloc design. A magnetic coupling connects the pump to the electromotor and transmits the power of the motor to the impeller.
