MTL5000 SERIES
Isolating IS interface units
Compact and easily installed:
the low cost per channel solution
- Straightforward 'clip-on' DIN-rail
mounting
- Low cost per channel
- High packing densities
- Simplified installation and
maintenance using plug-in connectors
MTL5000 Series
- the latest IS Isolator range from MTL - makes system planning
and installation as simple as possible.
The MTL5000 Series provides all common
functions, so
that most installations can be designed easily around MTL5000.
The MTL5000 clips
quickly onto DIN rail,
so it is compatible with the industry-standard mounting system.
Wiring is simplified by plug-in safe- and hazardous-area connectors,
and a power plug which accepts a power comb; it all leads to quicker
insertion, less wiring errors and trouble-free, tidier installations.
Where space is at
a premium, especially offshore,
isolation must be discreet. With a unit width of 16mm, and with
many units providing multiple channels (and hence a lower cost per
channel), the MTL5000 Series takes up a minimum of space - which
leaves more for other process control equipment.
Where older installations
are being updated, there
may be a need for more channels - but within the existing space.
The MTL5000 Series can provide the answer, fitting extra units and
channels into a space formerly occupied by bulkier isolators.
The MTL5000 Series
is designed for reliability.
It builds on the proven success of the MTL2000, 3000 and 4000 Series
to bring the benefits of new developments in galvanic isolation.
It is designed from the outset to meet all relevant European Directives.
Data Sheet
|
