Ion Air Gun™

New rugged ergonomic gun is a lightweight, effective spot cleaner.

What is the Ion Air Gun?
EXAIR's new Ion Air Gun combines incredibly fast decay rates with low compressed air consumption.  It is the ideal way to remove static, contaminants and dust from three dimensional parts prior to assembly, packaging, painting or finishing.  The Ion Air Gun neutralizes static electricity and cleans at distances up to 15 feet (4.6m). 

Why the Ion Air Gun?
The Ion Air Gun induces surrounding airflow through the gun at a ratio of 5:1, minimizing compressed air use and maximizing ionized airflow.  The force can be adjusted from a "blast" to a "breeze".  A comfortable grip and hand position allows hours of continuous use without fatigue. 

The Ion Air Gun is quiet, lightweight and features a hanger hook for easy storage.  The 10 foot (3m) shielded power cable is extremely flexible, and designed for rugged industrial use.  

Applications		Advantages
	Pre-paint dust removal		Rugged, lightweight, easy to use
	Clean and neutralize 3D parts		Rapid static decay
	Optics		Low air consumption
	Cleaning molded parts		Quiet
	Photo finishing		Effective up to 15' (4.6m)
	Lens cleaning		Shockless, non-radioactive
	Furniture finishing		Strong blowoff force and flow
	Package cleaning		No moving parts - low maintenance
	Container neutralization		Meets OSHA pressure and noise level requirements

How the Ion Air Gun Works
The Ion Air Gun incorporates a High Velocity Air Jet and electrically energized emitter point. A small amount of compressed air is injected into the barrel of the gun (1) inducing a high volume flow of surrounding air (2) to pass through it. The emitter point (shockless) at the discharge end of the gun (3) ionizes the entire airstream. The result is a high volume flow of ionized air (4) capable of neutralizing high static charges in fractions of a second. An optional filter and regulator cleans the compressed air and allows infinite adjustment of airflow and velocity.

Performance

* 6" (15.3cm) from target

Specifications

EXAIR Model 7901 or 7907 Power Supply (5 kV) is required for operation.
Power supplies are equipped with a 6' (1.83m) power cord, lighted power switch and (2) high voltage outlets.

Compressed Air:
1/4" NPT inlet provided

Electrical:
For use with 5 kVrms, 5 milliamperes (max.) power supply, Model 7901 (115V) or 7907 (230V). Power Supplies are UL Listed to U.S. and Canadian safety standards.

 

Electrical Hazard:
Shockless (less than 40 microamperes short circuited).
Do not use near flammable materials or gases!

Materials of Construction:
Metal Parts: Brass, Zinc and Stainless Steel
Plastic Parts: UL rated 94 HB
Emitter: Stainless Steel

80% of the delivered air is induced, minimizing air consumption of the Ion Air Gun.

PDF Download Brochure